ZC ( SOHC ) block/ Y8 head. What timing belt?
#1
I'm a Jackass
Thread Starter
Join Date: Mar 2004
Location: South Central Los ANgeles, CA, USA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
ZC ( SOHC ) block/ Y8 head. What timing belt?
Well i did a little research but i havent come up with a definate answer. I did however find 2 opstions. Use the Timing belt that coresponds to the head, in this case use the Y8 timing belt. the other is to use the Z6 Timing belt with my Y8/ ZC SOHC bottom end.
Any answers to this question???
thanks in advance.
Julio
Any answers to this question???
thanks in advance.
Julio
#3
Honda-Tech Member
Join Date: Apr 2002
Location: 32514, fl, usa
Posts: 4,147
Likes: 0
Received 0 Likes
on
0 Posts
Re: ZC (EFRue57)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EFRue57 »</TD></TR><TR><TD CLASS="quote">you would get the y8 timing belt.</TD></TR></TABLE>
#5
B*a*n*n*e*d
Re: ZC (julio_bOostamante)
I don't know if it will work. I've always been told to use the timing belt that corresponds with the head. Now you can try it, but i make no guarantees.
#6
I'm a Jackass
Thread Starter
Join Date: Mar 2004
Location: South Central Los ANgeles, CA, USA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Re: ZC (EFRue57)
i found out that both the Z6/Y8 have the same amount of teeth (104)
so i guess i could use either. then again, the Y8 is like 20 dollars cheaper
so i guess i could use either. then again, the Y8 is like 20 dollars cheaper
Thread
Thread Starter
Forum
Replies
Last Post