ZC engines
10-29-2012, 09:50 PM
#1
Trial User
Thread Starter
Join Date: Oct 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
ZC engines
Hello all, my brother has bought a 1991 hatchback dx that has had a zc dohc vtec swap done to it. Recently he found a puddle with the car and sucked up water through the cold air intake bending 3 of the rods. My question here is, will the rods out of any b-series vtec motor work or do we need to continue our search for zc rods. Any input on this will be greatly appreciated since my research is coming up empty, Thanks.
10-29-2012, 10:57 PM
#2
10-30-2012, 11:36 AM
#5
Trial User
Thread Starter
Join Date: Oct 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: ZC engines
I didn't think so either because this is not my first go round with hondas. The stamp on the block says zc, but it is definitely dohc and it has the vtec solenoid. I didn't think that it was an actually motor either. Regardless if someone can tell me what I would be looking at for rods that would be great, I would post a picture of it if it wasn't in pieces in my garage.
Trending Topics
10-30-2012, 05:22 PM
#8
My old title sucked.
Join Date: Nov 2003
Location: Out to lunch. WI
Posts: 5,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: ZC engines
The DOHC ZC is a non-vtec engine.
^Those are the rods you're looking for.
10-31-2012, 10:06 AM
#9
Honda-Tech Member
Join Date: Aug 2005
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Re: ZC engines
10-31-2012, 07:46 PM
#11
Honda-Tech Member
Re: ZC engines
I didn't think so either because this is not my first go round with hondas. The stamp on the block says zc, but it is definitely dohc and it has the vtec solenoid. I didn't think that it was an actually motor either. Regardless if someone can tell me what I would be looking at for rods that would be great, I would post a picture of it if it wasn't in pieces in my garage.
Thread
Thread Starter
Forum
Replies
Last Post