ZC bogging
#1
Thread Starter
Join Date: Oct 2002
Location: Pittsburgh, Pa, US
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
ZC bogging
I have this problem and wanted to know if anyone with a ZC swap has had the samething. I just completed my swap and the engine boggs at 3100rpm it wont let me get past that point. I just drove this engine in another car 3 weeks ago and it was great. can anyone help? I checked my connections several times. Its in a 1988 4 dr I used the same pm6 that was controlling it before, I put the zc chip in instead of the mugen to see if that was it,no luck.
#3
Re: ZC bogging (Ham'ed Hatch)
hmm...mine boggs sometimes at part throttle if i dont have my inline fuel pump running...like the stocky is having troulbe pushing through
try:
new fuel filter
advance timing
mess wit fpr..
try:
new fuel filter
advance timing
mess wit fpr..
#4
Re: ZC bogging (zcivic91)
are you throwing any codes? Mine was bogging too, but i just adjusted my fuel pressure to 35 psi from 50 psi and its fine now. quick throttle responce and no bogging anymore
#7
Honda-Tech Member
Re: ZC bogging (ZCcivic91)
<--Has low end/partial throttle hesitation/bogging. Also has a miss in the idle, along with other crap.
I love her though, and the way I pay her back is by shoving 7psi of compressed air down her throat...and she swallows it all...
jB
I love her though, and the way I pay her back is by shoving 7psi of compressed air down her throat...and she swallows it all...
jB
Thread
Thread Starter
Forum
Replies
Last Post