Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda CRX / EF Civic (1988-1991)
Sign in using an external account
Register Forgot Password?
Search


Welcome to Honda-Tech!
Welcome to Honda-Tech.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!


Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
Old 11-17-2010, 04:34 PM   #1
Honda-Tech Member
 
miguey310's Avatar
 
Join Date: Jul 2008
Location: Los Angeles , California
Posts: 1,343
iTrader Rating: (0)
Send a message via AIM to miguey310 Send a message via Yahoo to miguey310
Default Write-up : how to flush your radiator (with pics)

well i made a Write-up on how to flush your radiator cause i notice some people don't know how to do such a simple job like so here it goes.
sorry for the blurry pics

step1pen your hood and take off the radiator cap off
Click the image to open in full size.
step2:take off the drain plug
Click the image to open in full size.
Click the image to open in full size.
step3:if your water came out dirty than it's a good idea to clean it with your water hoses and let the the dirty stuff come out.once it's clean put the plug back on.
Click the image to open in full size.
Click the image to open in full size.
step4k get 50/50 mix antifreeze (needs 1 gallons but get 2 to be sure), and pour it in (it's a good idea to use a funnel)
Click the image to open in full size.
Click the image to open in full size.
step5nce you pour the antifreeze in start up the car and leave the top off so the air bubbles can come out
Click the image to open in full size.
and turn on the heater to the fullest so the thermostat can open faster
Click the image to open in full size.
or you can loosen that bolt to allow air to come out. which located next to the head
Click the image to open in full size.
step6 : once the thermostat opens put a nice cap on and you done!
Click the image to open in full size.
__________________
Quote:
Originally Posted by __oversea View Post
Are you supporting breast cancer or just gay?
91 civic: sold
miguey310 is offline   Reply With Quote
Old 11-17-2010, 04:40 PM   #2
Honda-Tech Member
 
Tyson's Avatar
 
Join Date: Apr 2002
Location: I am Tyson
Posts: 17,486
iTrader Rating: (0)
Default Re: Write-up : how to flush your radiator (with pics)

did it really need a write up to turn the heat all the way on and stick a hose in your radiator cap?
__________________
Don't IM me your TECHNICAL question. Start a thread, I'll answer there.
I am not a moderator, nor do I need to provide you technical advice.
Tyson is offline   Reply With Quote
Old 11-17-2010, 04:43 PM   #3
Honda-Tech Member
 
miguey310's Avatar
 
Join Date: Jul 2008
Location: Los Angeles , California
Posts: 1,343
iTrader Rating: (0)
Send a message via AIM to miguey310 Send a message via Yahoo to miguey310
Default Re: Write-up : how to flush your radiator (with pics)

Quote:
Originally Posted by Tyson View Post
did it really need a write up to turn the heat all the way on and stick a hose in your radiator cap?
lol :p
__________________
Quote:
Originally Posted by __oversea View Post
Are you supporting breast cancer or just gay?
91 civic: sold
miguey310 is offline   Reply With Quote
Old 11-17-2010, 05:31 PM   #4
Honda-Tech Member
 
KINGVEM^^ED6's Avatar
 
Join Date: Jul 2009
Location: suck it easy,WA
Posts: 15,765
iTrader Rating: (1)
Default Re: Write-up : how to flush your radiator (with pics)

nice for newbs
__________________
Quote:
Originally Posted by tonylovesjdmEF9 View Post
i would choke my ex it was pretty fun and wild
KINGVEM^^ED6 is offline   Reply With Quote
Old 11-17-2010, 05:51 PM   #5
Honda-Tech Member
 
Join Date: Aug 2010
Location: Stockbridge GA
Posts: 472
iTrader Rating: (0)
Default Re: Write-up : how to flush your radiator (with pics)

I was looking for this very thing yesterday and I couldnt find one on the site. Call me a dummy all you want but I didnt know you had to do anything with the heat controls.

Props man.
alex14 is offline   Reply With Quote
Old 11-17-2010, 05:58 PM   #6
Honda-Tech Member
 
miguey310's Avatar
 
Join Date: Jul 2008
Location: Los Angeles , California
Posts: 1,343
iTrader Rating: (0)
Send a message via AIM to miguey310 Send a message via Yahoo to miguey310
Default Re: Write-up : how to flush your radiator (with pics)

haha yeah :p
and no problem bro
__________________
Quote:
Originally Posted by __oversea View Post
Are you supporting breast cancer or just gay?
91 civic: sold
miguey310 is offline   Reply With Quote
Old 11-17-2010, 06:46 PM   #7
Honda-Tech Member
 
Join Date: Dec 2008
Posts: 541
iTrader Rating: (0)
Default Re: Write-up : how to flush your radiator (with pics)

You turn the heat on so the coolant will circulate thru the heater core. You should also keep the cap off for a little bit to get some air bubbles to percolate to the top. If you have air in the system, it causes a false reading causing your temp gauge to spike up.
asianflava is offline   Reply With Quote
Old 11-17-2010, 09:06 PM   #8
Honda-Tech Member
 
Tyson's Avatar
 
Join Date: Apr 2002
Location: I am Tyson
Posts: 17,486
iTrader Rating: (0)
Default Re: Write-up : how to flush your radiator (with pics)

Or just bleed the system properly after you're done with the bleeder screw...

The OP nicely illustrated this step with a close up of the bleeder screw. Lol
__________________
Don't IM me your TECHNICAL question. Start a thread, I'll answer there.
I am not a moderator, nor do I need to provide you technical advice.
Tyson is offline   Reply With Quote
Old 11-18-2010, 02:25 AM   #9
B*a*n*n*e*d
 
Join Date: Nov 2010
Posts: 40
iTrader Rating: (0)
Default Re: Write-up : how to flush your radiator (with pics)

Good for nubes, here are some posative additions.

There is a kit that locates a " t " fitting in the heater core line. By adding this t fitting you can hook a hose to the vehicle and flush the entire system. Most of the crap collected in the water system will settle in the bottom of the blocks outter cylinder walls or the heater core. And done per the instructions on the t fitting kit you can rinse the whole system but make sure the heater is in the full hot position so it will also flush the heater core.

Simply draining and flushing the radiator is a better idea than none as when antifreeze hit a certain age it become acidic and will start to eat the engine and gaskets from the inside out. Draining the heater core simply by leaving you controls on full hot, draining and rinsing the radiator and pulling the drain plug on the block itself will replace enough of the fluid to re start your antifreeze aging process. With that said the t fitting kit will help push some of the crap that settled out.

The block holds alot of water and knowing that age of the fluid is a factor not draining the block is kind of like using 2 quarts of new oil and 1.5 of used in your oil change, it helps but go the extra .5 mile by pulling the block plug and opening the heaters hot valve. The extra mile would be the t fitting kit.

Funny fact..... Caddies say after a flush to add stop leak as normal maintenance, they must feel real strongly about the strength of their head gaskets. Almost as funny as dodge having a motor with a " tolerance " for a crack in the head.

Most hondas as they were before mods commonly eat head gaskets and some of the mating surface just by someone leaving the antifreeze in to long. Heater hoses, heater core, bypass valve, radiator etc..... all abused by this chemical change.

Brake fluid is similar, if not changed out periodicly it will collect water, get filled with contaminates, function poorly and rot the entire system.

Be patient burping the air out of the water system as a trapped steam pocket can " push" out a gasket. It would likely be a weakened gasket but one that would have lasted longer burped properly.
rwdsohcef is offline   Reply With Quote
Old 11-18-2010, 09:15 AM   #10
Honda-Tech Member
 
DCRB's Avatar
 
Join Date: Jan 2008
Location: Portland, OR, USA
Posts: 5,145
iTrader Rating: (0)
Send a message via AIM to DCRB
Default Re: Write-up : how to flush your radiator (with pics)

nice write up! rwdsohcef speaks the truth... i know from experience. non bled cooling system plus ebay headgasket = wasted money.
__________________
Build Thread - My 88 ED6 Daily - 97 Vr6 Passat Wagon
Quote:
Originally Posted by BETOSCOUPE View Post
Plus my boss gets mad at me because she can't hear me 1/2 the time while I am on the phone with her lol "WHAT IS ALL THAT NOISE" - Bitch..... Its my Type R foo lol
DCRB is offline   Reply With Quote
Old 11-18-2010, 09:19 AM   #11
Honda-Tech Member
 
meloylo's Avatar
 
Join Date: Sep 2007
Location: In ThE hEaT
Posts: 371
iTrader Rating: (0)
Default Re: Write-up : how to flush your radiator (with pics)

Quote:
Originally Posted by rwdsohcef View Post
Good for nubes, here are some posative additions.

There is a kit that locates a " t " fitting in the heater core line. By adding this t fitting you can hook a hose to the vehicle and flush the entire system. Most of the crap collected in the water system will settle in the bottom of the blocks outter cylinder walls or the heater core. And done per the instructions on the t fitting kit you can rinse the whole system but make sure the heater is in the full hot position so it will also flush the heater core.

Simply draining and flushing the radiator is a better idea than none as when antifreeze hit a certain age it become acidic and will start to eat the engine and gaskets from the inside out. Draining the heater core simply by leaving you controls on full hot, draining and rinsing the radiator and pulling the drain plug on the block itself will replace enough of the fluid to re start your antifreeze aging process. With that said the t fitting kit will help push some of the crap that settled out.

The block holds alot of water and knowing that age of the fluid is a factor not draining the block is kind of like using 2 quarts of new oil and 1.5 of used in your oil change, it helps but go the extra .5 mile by pulling the block plug and opening the heaters hot valve. The extra mile would be the t fitting kit.

Funny fact..... Caddies say after a flush to add stop leak as normal maintenance, they must feel real strongly about the strength of their head gaskets. Almost as funny as dodge having a motor with a " tolerance " for a crack in the head.

Most hondas as they were before mods commonly eat head gaskets and some of the mating surface just by someone leaving the antifreeze in to long. Heater hoses, heater core, bypass valve, radiator etc..... all abused by this chemical change.

Brake fluid is similar, if not changed out periodicly it will collect water, get filled with contaminates, function poorly and rot the entire system.

Be patient burping the air out of the water system as a trapped steam pocket can " push" out a gasket. It would likely be a weakened gasket but one that would have lasted longer burped properly.


QFT

nice newb write up however
__________________
It is not so much that I succeed but that others must FAIL.

My for sale thread http://www.hondamarketplace.com/show....php?t=2732447
meloylo is offline   Reply With Quote
 
 
 
submit to reddit
Reply

Tags
88, cap, core, crx, drained, flush, heater, honda, hondatech, hose, intextforumradiator, lfush, positioning, radiator, system

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Miguey310's build / 91 civic miguey310 Honda CRX / EF Civic (1988-1991) 71 04-08-2012 04:06 PM
My road racing crx. CFP_IVAN Honda CRX / EF Civic (1988-1991) 93 11-23-2009 06:02 AM
For Sale Honda CRX Si with JDM front end. CFP_IVAN Vehicles for sale 7 09-26-2009 07:21 PM
Where can i get the orange neddle cluster?? miguey310 Honda CRX / EF Civic (1988-1991) 12 12-29-2008 07:53 AM
Pix from the SoCal Sedan Meet part II EF Sedan Enthusiast Honda / Acura 51 10-31-2008 08:13 PM



All times are GMT -8. The time now is 05:27 AM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details