James89DX

My exhaust has developed a bunch of holes and I'm sick of sounding like a ricer so I'm replacing the whole thing. The new stuff came in today but the problem is I'm having trouble figuring out what type of gasket should go here. This is the flange section near the passenger rear wheel. That section of my stock exhaust has long been cut out and replaced so I have no reference.

Here is the joint in question on my new exhaust:







The piping is 1 3/4" - does this mean I need something like this (minus the flange in the link obviously)?

http://bit.ly/18dD0ST

Or does anybody have an exact part number? Looked at the diagrams on Honda Parts Now and the gasket is listed as number 23 on the diagram but there is no corresponding part listing for it. Rock Auto lists several different styles including simple crush rings.

90_EX_Civic

donut gasket. you can get them at any parts store.

Freemananana

iTrader: (3)

Yup, they just squeeze in there and get compressed.

James89DX

Do either of you have part numbers? I can't find anything at local parts stores. They have donut gaskets listed but they're 2" I.D., I need 1.75" I.D.

Freemananana

iTrader: (3)

I'll try and find one right quick. Didn't think these were hard to come by. I reused them a lot of the time too.

Freemananana

iTrader: (3)

Okay, here's the link to summit racing:

http://www.summitracing.com/search/d...tOrder=Default

And here's the one I think you want:

http://www.summitracing.com/parts/wl...ivic/year/1989

I just put 89 honda civic in for the car. I know this isn't advance or anything like that, but I hope it will get you started.

James89DX

Thanks man, after much checking around I finally found a PepBoys in my area that had the Walker 31360 in stock. Oddly enough they didn't even show it as a fit for my car but it worked perfectly. No more embarrassing fart pipe sound for me

Freemananana

iTrader: (3)

Yeah, the parts stores don't know anything about cross fitting on the same platform. Very rarely at least. Glad it worked out or you!