What color is wire is for ckp sensor on obd1/obd2 distributors?
#1
Junior Member
Thread Starter
Join Date: Oct 2001
Location: Fl, usa
Posts: 891
Likes: 0
Received 0 Likes
on
0 Posts
What color is wire is for ckp sensor on obd1/obd2 distributors?
I am getting an error code 4 on my p28 ecu and need to know which wire is the crankshaft position sensor. If you know, please post up.
Thanks
Steven
Thanks
Steven
#2
Honda-Tech Member
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: What color is wire is for ckp sensor on obd1/obd2 distributors? (cbrman)
there should be 7 wires coming out of the dizzy. i'll list the colors like this:
sensor: wire color/stripe color and then the ecu pin
crank sensor: blue/green B15, blue/yellow B16
cyl sensor: orange B11, white B12
tdc sensor: orange/blue B13, white B14
ingition input signal: yellow/green A22
there are two other wires but they match in color to the obd-0 dizzy and are much fatter. they are the wires that go on the separate two pin plug
[Modified by racerxadam, 6:53 PM 11/11/2002]
sensor: wire color/stripe color and then the ecu pin
crank sensor: blue/green B15, blue/yellow B16
cyl sensor: orange B11, white B12
tdc sensor: orange/blue B13, white B14
ingition input signal: yellow/green A22
there are two other wires but they match in color to the obd-0 dizzy and are much fatter. they are the wires that go on the separate two pin plug
[Modified by racerxadam, 6:53 PM 11/11/2002]
Thread
Thread Starter
Forum
Replies
Last Post
JDMekBoosted
Honda Civic / Del Sol (1992 - 2000)
1
12-17-2008 01:07 PM