Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda CRX / EF Civic (1988-1991)
Sign in using an external account
Register Forgot Password?
Search


Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
Old 08-02-2011, 06:49 PM   #1
Honda-Tech Member
 
Join Date: Jul 2011
Posts: 17
iTrader Rating: (0)
Icon6 timing marks on crank pulley...

hey i know when timing a D15B2 your supposed to use the different color marks on the crank pulley, well what if your pulley is so old there are no more colors? from what i can see there are 3 clustered together and 1 by itself? I bought a EF hatch for $500 needed timing belt, did the timing belt and runs good but i want to double check to make sure I'm at 18 degrees which is what the label says under the hood. thanks for your help!
jimmak85 is offline   Reply With Quote
Old 08-02-2011, 06:52 PM   #2
Honda-Tech Member
 
Gunmetal_B20_Hatch's Avatar
 
Join Date: Apr 2005
Location: Georgia
Posts: 1,825
iTrader Rating: (9)
Default Re: timing marks on crank pulley...

base timing should be 16.5 degrees...

The single mark is 0, the middle one of the 3 close marks is your 16.5.

Be sure you jump the service connector when you are checking timing also.
__________________
Quote:
Originally Posted by Tyme2Breathe View Post
No tune. Turbo was was installed about three weeks ago. It ran fine up until Mon.
1992 DX Hatch - Fully built 2.0L non-VTEC - 7.68 @ 95 (only 12psi)
Gunmetal_B20_Hatch is offline   Reply With Quote
Old 08-02-2011, 07:03 PM   #3
Honda-Tech Member
 
Join Date: Jul 2011
Posts: 17
iTrader Rating: (0)
Default Re: timing marks on crank pulley...

that means its timed right cause i put a dot where the middle line is and the mark on the lower cover lines up there, and of coarse i jumped the blue connector next to the ECU. My sticker under my hood says base timing at 18+2 advance I don't know why its different then what you said.
jimmak85 is offline   Reply With Quote
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
D16Y7 Crank Pulley Timing Marks raffaelli Honda Civic/Del Sol (1992 - 2000) 2 09-02-2013 08:10 PM
B18C TDC Issue f22a Acura Integra 3 01-09-2010 07:11 PM
Can't see timing marks on pulley.. What's wrong ?!?! iperez Acura Integra Type-R 12 06-24-2004 07:58 AM
d15b7 engine timing 93coupeDX Honda Civic/Del Sol (1992 - 2000) 3 05-04-2004 01:45 PM
Timing Marks? schlack Honda Civic/Del Sol (1992 - 2000) 1 05-13-2003 11:45 AM


Tags
18, 1992, 2000, accord, civic, crank, crankshaft, ef, honda, integra, mark, marks, pulley, s2000, timing, vtec

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Join Honda-Tech.com

All times are GMT -8. The time now is 02:53 AM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details