temp gauge not working b18 swapped ef
#1
temp gauge not working b18 swapped ef
Okay so today my cars heater was not heating very good it was only coming hot out of one vent it just did this roday before the heater was decent not really warm but kinda warm i checked the upper radiator hose it wasent too hot the lower was really cold also i have the radiator fan running while im driving the car could this mean my thermostat is going bad ? Or is this my heater core . Also ever since i got the car the temp gauge never has worked i notice that the connector that goes ont the sending unit wasnt on the wires so i took the connector off and wrapped the cable around the sending unit it still didnt work is their a fuse or something that can be blown and stop my gauge to not read the temp or do i need a new gauge how can i test this issue i am. Having thanks
#2
Re: temp gauge not working b18 swapped ef
EF is 4th gen not 5th and 6th gen.
Couple that with one bunched up paragraph making it hard to read. Wrong forum, hard to read. You might want to fix that.
Also you should really state full car details, year, make, model, trim level and all modifications.
I'm moving the thread to the EF section as that is where this thread belongs.
Couple that with one bunched up paragraph making it hard to read. Wrong forum, hard to read. You might want to fix that.
Also you should really state full car details, year, make, model, trim level and all modifications.
I'm moving the thread to the EF section as that is where this thread belongs.
Thread
Thread Starter
Forum
Replies
Last Post
Fosterryan
Honda CRX / EF Civic (1988 - 1991)
4
01-06-2015 09:01 PM
Quik89Si
Honda CRX / EF Civic (1988 - 1991)
23
01-11-2003 11:03 AM