B16CRXVTEC

hey honda tech. i just need a little advices. The good and the bad. why to do it and why not to do it.

so im looking to swap a b series motor into my crx i bought about a month ago. back in 2003 or earlier i had did a swap with a jdm b16. the swap went well the car ran strong. until some thieves stole my car. so i end up sayin f imports. since then i havent look into swaps or though about it. now its 2009 still have the love for CRX's. im thinking about either swapping a B16 or a GSR motor. whats the good the bad and ugly of a GSR motor swap into a CRX? any advice is appreciated. thankx/

0Janet@bisimoto

Do what Bisi did in his CRX. He swapped a F22A1 engine into the crx and he designed the Bisimoto H2D kit for this build. This kit allowed the engine to fit snug into the engine bay; and the hood was not elevated so no theft would know that you had a swap unless they looked under the hood. The F22A1 is an excellent engine to tune because of its displacement and head design. Its intake and exhaust ports are large which will allows for easier air flow and exhaust scavenging. These engines are also relatively inexpensive to tune and modify in comparison to their B-series brethren, which is an economic benefit.

.Manny.

iTrader: (1)

What kind of power are you looking for? what kind of budget are you working with? what do you want the car for once the swap is in?

ef_ftw73

do it.....





hood clearance

bryse68

gsr would be good. i have a ls/vtec with hasport mounts and the hood doesn't shut......

ef_ftw73

my h22 shuts just fine

B16CRXVTEC

what im looking for is something that has more power then b16a. my budget is to get what ever part i need to get to make it happen. so no budget. as long as i know i need that part for it to run then thats what ill have to do. i preferred b series not looking to go H or F or K.

GSR motor VS B16A? does the Gsr have to much torque? where i want be able to lunach properly?

after the swap it will be a daily driver.

redDAinteg

Boost the single cam.

96gts4.6l

Where's the radiator, intake tube,etc.?

dacrxguy

go big or go home homie

.Manny.

iTrader: (1)

I would say build a b20vtec. you wont look back if you do it properly. You can easily make over 200whp and 150tq. It will blow any b16 and gs-r out of the water. and it will be new and you won't be left guessing what the actual mileage of the engine is.

OneBadTurboCRV

572 BBC with quad turbos...

crx_si-r

since your in cali, will this be a normally driven car? if so i suggest the following: swap in an LS, reff it so there are no worries with the police then swap the motor for an LS/V, B20/V, B18C1, B18C or B18C5.

once your reff'ed if you decide to stay with the 1.8L family then you will have no worries at all.

jllong95

Y not make a poor mans Type R and put a B16 head on top of a GSR block and call it a day nice power for alot cheaper than a Type R just like 10 or 15 horse less than a Type R

crx_si-r

that too, i missed that combo in my list.

ek_bape

mother ef-er

hehe^^ heheheheeh.

and btw, theres definitly alot of "*****" on your windsheild...
thats what she said.

ek_bape

Lol it's a alien not a ****

mother ef-er

haha, hahaahh thats the funniest thing iv ever heard in my life!

EL Vap133

1. What are your plans for the car?

2. What is your budget?

apekd

I say D series all the way. They are in EVERY junkyard, a lot of info on them too. I got a D16Y8 for 100 and it came pretty much a bare engine missing a lot of stuff. a few junkyard trips, some ebay buys and its getting closer to being done. People can build a fast D series turbo or n/a for around the price of just buying like a B series FULL swap from HMO and such. just my $.02 worth though.

Bunger

Considering how cheap building a d-series turbo is these days, I agree with the boosted d idea. Vitara pistons and some FJR rods are like $425 new with rings and will handle 400+ WHP. Oh and the 75lbs of weight savings over a B is nice too.

ALLxMOTOR EG

gsr>b16 anyday.

Hell i would even choose a ls motor over a b16 because a b16 feels like a single cam until vtec hits.

nitewolf

ls&b16 tranny with a lightweight flywheel. seen this setup beat gsrs and b16s

jllong95

U could fix that with Itr cams and a good tune