Some help, please.
08-29-2014, 11:53 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Some help, please.
Hey! I have several problems.
After the engine gasket ( between the head and the block) blow, i decided to take the old block ( because it was sooo bad... oil consumption 1,5 l/ 1000 km)
One friend of mine gave me his block. D14A4
At first everything was OK, until the moment when we found out, that the d15 head bolts are 140 mm long, and the d14- 120 mm. I bought d14- bolts.
So far so good.
Now my worries are if my Timing belt will fit on, or not. I have d15 and d14 timing belts, and i'm not sure witch one will do the work. They have differences in number of teeth аnd length.
Please help
After the engine gasket ( between the head and the block) blow, i decided to take the old block ( because it was sooo bad... oil consumption 1,5 l/ 1000 km)
One friend of mine gave me his block. D14A4
At first everything was OK, until the moment when we found out, that the d15 head bolts are 140 mm long, and the d14- 120 mm. I bought d14- bolts.
So far so good.
Now my worries are if my Timing belt will fit on, or not. I have d15 and d14 timing belts, and i'm not sure witch one will do the work. They have differences in number of teeth аnd length.
Please help
Thread
Thread Starter
Forum
Replies
Last Post
aldoniousmac
Honda Civic / Del Sol (1992 - 2000)
2
05-30-2007 02:37 PM
W O T
Tech / Misc
7
08-22-2005 11:07 AM
W O T
Honda CRX / EF Civic (1988 - 1991)
5
08-22-2005 05:50 AM