alamexico08

Just requested for a CRX and 1990 civic sedan also

Red_ED8

iTrader: (1)

Sent my request, asked for a few sets actually. I know I'll end up with more crx someday and I'll want some for them to lol.

quirarte626

sent request!

ukdm crx

keep sending the requests lets get these made.

Maldito X

i put in my request

JesseCRX

Bump for spring time!

Sent another request in from my work email address.
From what I can tell, there is like one operator that works there so I'd suggest not calling anymore and sticking to email/website requests.
I found the email address to the founder and CEO of the company, David MacNeil
dmacneil@macneil.com

Whether it goes to him or not, I dunno. But worth a try!

On another note, I found a set of visors but they were broken!!! I can't stand when people go to a salvage yard and DESTROY everything just to get to a few parts in the car! The doors were on the ground with muddy footprints all over them, and the visors were stomped! I was so angry!

Bring on another round of requests for our old cars

fndbt

also requested! I'd love a set of these.

michael-crxsi

lets start getting some sent for the mud flaps also. front ones are way to much to buy used ones

Red_ED8

iTrader: (1)

Anyone hear back from them yet???

Red_ED8

iTrader: (1)

Sent another request in under my wifes email account

fndbt

So it took me a week to notice they have a Canadian site.

I've just ordered a set of the 88-89 visors. I realized that Canadian 90-91s seem to have the same doors as the USDM 88-89s, so I called them and found that their in-house notes back this up. Their US notes say they are only for 88-89s, which makes sense based on what people have said in this thread.

So, anyone with a 'CDM' hatch who happens to be looking at this thread, you might be safe to order the 88-89 set from the Canadian web site.. even though the site uses the same db as the US site and says the visors are only for 88-89.

I'll install them and post how it goes! (my request for 1991 visors still stands, they don't know i'm from canada since i requested on the US site)

fndbt

Just to update: I've installed them (took 3 min, no tape or clips even) and they fit perfectly. So, anyone with a 'CDM' 90-91 can order the 88-89 set without worry. But put in a request for everyone waiting for these guys to make ones for the 90-91 USDM hatch/wagon/rex

They don't sit like the oem ones do. Since they tuck into the window channel, they sit lower than the oem ones would. They do, however, tuck in really close to the window, which i like - the 'b' pillar cover sticks out more than the visors do. and the branding is quite subtle, a decal that looks like it can easily be removed. They also extend lower in the front than the oem ones - right down to the base of the mirror.

The only colour available is 'light' tint, which suits me fine, I think it matches the tint on the sunroof visor fairly closely.

i'll post a few pics below for anyone who's curious, here's how they look on my stock-exterior Si. I haven't seen any pics of these installed on a hatch yet, so here you go.

I hope they make them for everyone who's waiting!

fndbt

Oh, yeah, and they are held in place mostly by elastic pressure from the plastic itself. You bend them a bit to get them in, and they snap back into the original shape, into place inside the window channel. Simple and smart design, really.

mayfly

yes finally!!!!!!!

fndbt

The pics above are for a CANADIAN 1991 model - I just wanted to post pics to show everyone what these visors look like.

Weathertech hasn't started making these for 1990-91 USDM models yet, as far as I know. I just noticed that the Canadian 90-91 doors are the same as the USDM 88-89 doors, so I ordered them for my car.

Please keep requesting these from Weathertech if you like them and want to get them made for the 90-91 hatch / crx / sedan!

ef nine

bump and i m in for this also !

zrickety

iTrader: (1)

i requested crx visors months ago...i will request again!!

Custom Rex

Tried the cdm hatch visors, on my 1991 crx and no luck too long didn't fit. So all crx owners we are still requesting....

michael-crxsi

so i just spoke to one of the guys on the phone and asked how many have to be requested to get them rolling and he said around 500 for mud flaps and around 100 or so for window visors but he made it seem like they dont even really listen to request at all

volksnuts

requested (even though I don't mind my ventshade ones that are already on my sedan)
Doing it for Jesse

KINGVEM^^ED6

iTrader: (1)

so these are maid for 91 us civics now??

ef yu

yes, they are made for 88-91 civic hatch backs NON US VERSION.
its made for the PILLAR MOUNTED seat belts. the USDM 90-91 CIVIC are door mounted seat belts which will NOT fit. be aware of the fitments issue if you live in the US.

KINGVEM^^ED6

iTrader: (1)

fawk so request 90 91 spec??

fndbt

Yes, all US 90-91 had the door-mounted seatbelts. If you've got door-mounted seatbelts, they don't have one available for you yet.

Also, they don't have any for any 88-91 CRX yet.

BrayzieEF9

any updates on the visors???