Notices

rear disk conversion trailing arm bushing??

Thread Tools
 
Search this Thread
 
Old 08-08-2009, 04:34 PM
  #1  
Junior Member
Thread Starter
 
efnick's Avatar
 
Join Date: Aug 2007
Location: torrace, ca, usa
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Default rear disk conversion trailing arm bushing??

ok, i got a mystery rear disk conversion off of an 89 civic hatch at the junkyard. i need to replace the trailing arm main bushing, so i go to the dealer and get a set for a 91 crx si. the diameter is too small. so i go back, they check the integra bushing and the cr-v bushing, all too small a diameter. does anyone know what model, US or JDM spec, came with these large diameter trailing arm bushings? ANY help is appreciated! thanks- nick h.
Old 08-08-2009, 05:39 PM
  #2  
Honda-Tech Member
 
don foreman's Avatar
 
Join Date: Apr 2009
Location: Medford, OR
Posts: 223
Received 17 Likes on 13 Posts
Default Re: rear disk conversion trailing arm bushing??

Cant help you with finding a bushing. I wouldn't worry about it. on my 89 I just unbolted the four Torx head bolts, and the one nut off the rear trailing arm and removed the disks/ hubs off the arms. I let some penetrating oil sit on them sprayed from both sides as much as possible for a few hours, then they came out with just a bit a grunting. Good luck!
Old 08-08-2009, 07:56 PM
  #3  
Honda-Tech Member
 
NlCK B's Avatar
 
Join Date: Aug 2005
Location: nowhere, CA, USA
Posts: 357
Likes: 0
Received 0 Likes on 0 Posts
Default Re: rear disk conversion trailing arm bushing??

90-93 intergra
Old 08-08-2009, 08:21 PM
  #4  
Honda-Tech Member
iTrader: (4)
 
frank_el_tanke's Avatar
 
Join Date: Nov 2008
Location: Pueblo West, CO
Posts: 991
Likes: 0
Received 1 Like on 1 Post
Default Re: rear disk conversion trailing arm bushing??

^^x2

DA's use the larger bushings
Old 08-09-2009, 08:54 AM
  #5  
Honda-Tech Member
 
johnnyonth3spot's Avatar
 
Join Date: Mar 2008
Posts: 272
Likes: 0
Received 0 Likes on 0 Posts
Default Re: rear disk conversion trailing arm bushing??

Originally Posted by don foreman
Cant help you with finding a bushing. I wouldn't worry about it. on my 89 I just unbolted the four Torx head bolts, and the one nut off the rear trailing arm and removed the disks/ hubs off the arms. I let some penetrating oil sit on them sprayed from both sides as much as possible for a few hours, then they came out with just a bit a grunting. Good luck!
WTF? did you read his post he's looking for bushing

3x da have the larger bushings
Old 08-09-2009, 08:58 AM
  #6  
Honda-Tech Member
 
johnnyonth3spot's Avatar
 
Join Date: Mar 2008
Posts: 272
Likes: 0
Received 0 Likes on 0 Posts
Default Re: rear disk conversion trailing arm bushing??

I have a part number here check this link out in the faq
https://honda-tech.com/forums/suspension-brakes-54/rear-trailing-arm-bushing-rta-part-number-1960010/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeoMetry
Honda CRX / EF Civic (1988 - 1991)
12
04-16-2015 04:13 PM
serb_rida
Suspension & Brakes
2
06-19-2008 04:16 PM
redwards
Honda CRX / EF Civic (1988 - 1991)
10
01-25-2007 06:35 PM
sleeperCRX
Honda CRX / EF Civic (1988 - 1991)
4
09-25-2001 07:35 AM



Quick Reply: rear disk conversion trailing arm bushing??



All times are GMT -8. The time now is 07:24 PM.