mr_valentino20032000

Ok, i am in the middle of getting everything ready for an engine swap, a DOHC ZC into my CRX. I have bought 2 radiators so far; an EG (the 1/2 size) and one i bought from http://www.radiator.com and they sent me a diffrent one from my stock one.

It has two brass...tubes that come out of the bottom and i can't use them. So this brings us to the question....

Can i just cut off the things and stuff them with JB Weld and call it a day or what? Oh yeah i'd buy another one but the engine is getting here on tuesday

mr_valentino20032000

oops..thanks for everything in advance

mr_valentino20032000

no one knows? i'm not even sure what they are for

XrcR6

So the second one is basically like stock with the exception of the additional 2 fittings? It's probably a provision for a tranny cooler for an automatic transmission car. In that case you can just cap/plug them off or loop them together.

ZCdohcHB

the 2 pipe on the bottom is for the automatic transmission
i have the same thing, i just plugged it up

mr_valentino20032000

Ok in that case...does your hit the front cross member? It looks like mine is going to and if i hit a bump or something they will bend off. And i don't want that to happen

Maybe i'm just being paranoid

mr_valentino20032000

to cut or not to cut..that is the question. Anyone?

mr_valentino20032000

up for the evening

CRX T-Si

Just unscrew those two fittings off the new Rad, problem solved.

If their not screwed on then just use a hack saw and cut it off.

It's easy as 1-2-3.