Performance Head Parts for d15b2
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: AL, USA
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
Performance Head Parts for d15b2
I have a head for my d15b2 and i want to rebuild it, hopefully with better springs and 1mm oversized valves, with a good port job. Who makes performance head parts for a sohc d15. Are there cams too?
#2
Honda-Tech Member
Join Date: Mar 2002
Location: www.exospeed.com, Valencia, CA
Posts: 12,899
Likes: 0
Received 1 Like
on
1 Post
Re: Performance Head Parts for d15b2 (memorybox)
we have cams for the d15, but what is your ultimate goals for the engine anyways. Oversize valves are usually not recommended for basic street applications. You only go oversize if you are opening up the ports alot AND increasing displacement and compression at the same time. Remember you want velocity in the head as well. even if you provide the volume of air before it gets in the cylinders, if its not getting in there fast enough, its not going to help any.
#3
Honda-Tech Member
Join Date: Feb 2005
Location: Charlottesville, VA, USA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: Performance Head Parts for d15b2 (memorybox)
The head is the same as the d16a6 or si model valves for that engine will work aswell as the cam..so wherever you look for parts just order for the d16a6 and they will work..
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: AL, USA
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
well i plan on getting the head shaved to raise a little compression, because im doing a mpfi swap so i figured id get a full intake/head/header port and get the head built, and race the car at the drag strip
maybe use nitrous if applicable
maybe use nitrous if applicable
Thread
Thread Starter
Forum
Replies
Last Post
WickidSi
Honda CRX / EF Civic (1988 - 1991)
1
03-02-2003 09:42 AM