carthik

I know the EF Civic 3DR never came with the ITR/CTR style red Honda emblems but I want to know if there are any OEM options that line up to the factory holes?

If there are none that line up which ones are the closest in size/shape for the front and rear? (I'll just remove the two centering "pin" thingers and use some adhesive).

Part numbers would be helpful but not necessary.

Thanks,

Carthik

Todd00

Did someone bump this post from 2001 or something?

I thought this mod/trend died out when folks finally realized that unpainted bodykits really didn't look good either.

carthik

Cool story bro. Did I ask for your opinion?

I don't care what "mod(s)/trend(s)" are considered cool to earn internet brownie points, I concern myself with things I want to do to my car because I like it.

I asked a tech question, if you don't have something technical to contribute in regards to the topic, kindly GTFO. Thank you.


Back on topic:

I did some more research and it seems a few reputable vendors do sell front and rear Red Factory OEM Honda emblems for EF Civics, but of course, in the interest of their profits they leave out the part numbers.

So it seems there is an OEM "bolt on" solution, does anyone know off which car(s) and/or the part numbers for the emblems I'm after?

Cheers,

Carthik

~sp33~

I'd suggest going to a wrecker, pulling off a few badges and take your verniers to measure the gap between the holes.

carthik

I already have the badge off the front of my EF for measurements. That doesn't really help when I have nothing to compare to. The front and rear badge for the EF hatch are the same part.

Cheers,

Carthik

~sp33~

That's why i would suggest going to a wrecker and checking to see if EG/EK/EP/DC etc have the same width between securing legs.