I need to convert to OBD1. I am running a stock D16A and i know i have to change to a 4 wire 02 sensor but i dont know what type of distributor i need. I have read so many different suggestions but they all contradict each other. I is hust a obd0 D16A non-vtec head. Which obd1 dizzy would fit. The reason i am going to go to obd1 is to run a Hondata.
the distributor that you need is a TD-41U or TD-42U.
TD-41U found on DX, LX civics from 92-95
TD-42U found on EX, Si civics from 92-95
it all depends on what your set up is going to be. if your stayin non vtec you can use a TD-41U but it might not bolt up to your current motor. i know when i did a mini me i had to modify the ears to bolt up to my old D16A6 bottom and D16Z6 head.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.