3s0n3

whats your favorite traction setup to eliminate hop in a crx?

Ak_ef9

do a search before you post stuff.

here I did the work for you
https://honda-tech.com/zerothread?id=1156671

VtecSyndrome

Tokico 5-ways with Skunk 2 coilovers!!!!!!, best bang for the buck. Traction bars help also but depending on your power output you may not need one. If your running all motor you can usually get away with out using the traction bars. I eliminated wheel hop completly in my '88 CRX Si with the D16a6 and I/H/E, it was not as quick as my B16 powered CRX and since I have not gotten 5-ways up front yet (only have blues on Skunks right now) I am not sure if that will be all I need. I will know in a few weeks though.

Pee Wee

full-race traction bars

si0385.

if its lowered i would start with a camber kit instead of throwing that much money on a full race trac bar setup...

if that dont help than pollyurethane inserts...

than go the full race trac bar setup

Pee Wee

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jaydeum4lyfe &raquo;</TD></TR><TR><TD CLASS="quote">if its lowered i would start with a camber kit instead of throwing that much money on a full race trac bar setup...

</TD></TR></TABLE>

you say it like its a waste of money seriously its a huge difference

si0385.

its not a waste of money at all... im saving up for one right now... im also preping for turbo next summer and my 4-1 header hits right now...

stock motor and stock mounts i would start with camber kit and inserts

Tyson

https://honda-tech.com/zerothread?id=1124506

fresh pizza guy

so... i have a 2000 civic ex, with innovative full race mounts, tein SS damper kit, Skunk2 camber kit, nitto Neo Gen tires, and my turbo d16 still gets wheel hop... i suppose my only other option is traction bars, correct?

Pee Wee

its not your only option but it does work.

si0385.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fresh pizza guy &raquo;</TD></TR><TR><TD CLASS="quote">so... i have a 2000 civic ex, with innovative full race mounts, tein SS damper kit, Skunk2 camber kit, nitto Neo Gen tires, and my turbo d16 still gets wheel hop... i suppose my only other option is traction bars, correct?</TD></TR></TABLE>

sounds like a nice setup... get it aligned again it can get nocked out from time to time... but full race trac bars are completley worth it with a setup like that imo

fireant

squirt some GE black silicone II caulk into the motor mounts, then clean up the mess with an ice cube. It works wonders for $6.

si0385.

3m window weld works better thats made of urethane

Mr Synister

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Pee Wee &raquo;</TD></TR><TR><TD CLASS="quote">full-race traction bars </TD></TR></TABLE>

x2

I just ordered mine and cant wait for it to arrive.