Need help with 91 HB front end straightening - Dimensions
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Nor Cal, CA, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Need help with 91 HB front end straightening - Dimensions
Here is what I got.. I bought the car in it's current state for a song. I have purchased all the parts needed for rebuild and have begun the task of fixing the front end and getting this 91 hatch back on the road! I need some help with the dimensions of the front end. I am having a hard time eyeing it straight with no refrence of what straight ever was. If you have an unwrecked ef hb can you take some simple measurements for me...I'll buy you Beer! Here is a pic with what I need as well as some other pics of my projects progress!
The old core support
My cleaned up and painted junkyard core support
Junkyard fender almost ready for primer/paint
Caved in radiator and condensor (ac removed and all the good parts will be for sale, pm me)
Cleaned up and painted (yes with radiator paint) junkyard Crx Si radiator
The Junkyard hood almost ready for primer/paint, also has been a recycled hood once before me..Also note the badgelessness..ohh, ahh!
Any other comments/questions encouraged!
The old core support
My cleaned up and painted junkyard core support
Junkyard fender almost ready for primer/paint
Caved in radiator and condensor (ac removed and all the good parts will be for sale, pm me)
Cleaned up and painted (yes with radiator paint) junkyard Crx Si radiator
The Junkyard hood almost ready for primer/paint, also has been a recycled hood once before me..Also note the badgelessness..ohh, ahh!
Any other comments/questions encouraged!
#3
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Nor Cal, CA, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (REX VT)
Anyone? Please? I know there are lots of you with straight ef's and a tape measure!!! I will send beer/****...lol
#4
Re: Need help with 91 HB front end straightening - Dimensions (FLuiD91HB)
I can check for you tommorow, when I drive 130 miles to work on my track car. I have a crx, but my boy has a 90 civic, so I'll check his.
#5
Honda-Tech Member
Re: Need help with 91 HB front end straightening - Dimensions (743)
Ill see what I can do tonight. Im working some OT. Then dropping my head off at MOFOCO, then helping 99mrsi buy his new 90si.
Let me know what measurements you want. I get the idea from your picture but specific words might help me out a little.
-Jake
Let me know what measurements you want. I get the idea from your picture but specific words might help me out a little.
-Jake
#6
Re: Need help with 91 HB front end straightening - Dimensions (FLuiD91HB)
h ahve an 89 dx and a 91 si,
do u have a new radiator support, if not get one because straightening it pretty hard, email m at hondacivicsk8r66@cs.com, for exactly where u need measure ments i'll do it with pleasure
later
david
do u have a new radiator support, if not get one because straightening it pretty hard, email m at hondacivicsk8r66@cs.com, for exactly where u need measure ments i'll do it with pleasure
later
david
#7
Honda-Tech Member
Join Date: Apr 2002
Location: va, USA
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (efcivicsi)
i think u got the wrong fender, the one u have in the picture is from a crx...and u got a crx..
Trending Topics
#8
Join Date: Oct 2002
Location: St. Albert, AB, Canada
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (mysiqu)
i have a 91 hatch
i have a digi cam
i have a tape measure
do you just want me to hold it up against my car?
any exact points??
i have a digi cam
i have a tape measure
do you just want me to hold it up against my car?
any exact points??
#9
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Nor Cal, CA, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (CRXSiBeater)
I have a new core support....I just need to know where the red lines are...Basically the height width of both headlight brackets. Height and spacing where the core support bolts in...depth from the core support bolts from bottom...
Hmm..the fender is "supposedly' from a hatch...I will go compare it to my mangled one right now!
Hmm..the fender is "supposedly' from a hatch...I will go compare it to my mangled one right now!
#10
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Nor Cal, CA, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (FLuiD91HB)
Damn...The ******* fender is wrong....What an e-bay lier! It was supposedly off of another 91 hatch....
This is my first Honda...So I didn't know the difference, I can clearly see now....i should have checked befroe I did all the body/prep work to it...Lol
Anyone have an ef hatch lf fender they want to trade for a ready to prime/paint crx lf fender? I will pay shipping both ways...
And if I could get any help on my measurements! Thx!
This is my first Honda...So I didn't know the difference, I can clearly see now....i should have checked befroe I did all the body/prep work to it...Lol
Anyone have an ef hatch lf fender they want to trade for a ready to prime/paint crx lf fender? I will pay shipping both ways...
And if I could get any help on my measurements! Thx!
#11
Join Date: Oct 2002
Location: St. Albert, AB, Canada
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (FLuiD91HB)
so you want me to take off my bumper and take out my headlights for the pics?
cause i don't really want to do that....i don't have a garage and it's -3 outside
cause i don't really want to do that....i don't have a garage and it's -3 outside
#12
Member
Join Date: Feb 2002
Location: Sudbury, ontario, Canada
Posts: 2,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (shorti)
I have some pics with my headlights and bumper off if that will help u at all.
ill see if I can take some measurements for ya too, I have the car in the garage right now, but the headlights aren't out and bumper isnt off anymore though, but whatever other measurements u need, i can most likely take
[Modified by Hcivic88, 4:16 PM 1/3/2003]
ill see if I can take some measurements for ya too, I have the car in the garage right now, but the headlights aren't out and bumper isnt off anymore though, but whatever other measurements u need, i can most likely take
[Modified by Hcivic88, 4:16 PM 1/3/2003]
#13
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Nor Cal, CA, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (Hcivic88)
Ohh..that definitelt helps....I just though with this many members maybe someone had ther hatch apart....thx!
#14
Member
Join Date: Feb 2002
Location: Sudbury, ontario, Canada
Posts: 2,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (FLuiD91HB)
Ohh..that definitelt helps....I just though with this many members maybe someone had ther hatch apart....thx!
#15
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Nor Cal, CA, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help with 91 HB front end straightening - Dimensions (Hcivic88)
I appreciate any help...I am heading to a local Honda salvage yard to see if they have a strait one with the bumper cover off....I don't care if I have to take it apart!
Thread
Thread Starter
Forum
Replies
Last Post
pit.crew
Honda CRX / EF Civic (1988 - 1991)
10
03-02-2012 04:01 AM
sweetcivic2005
Honda CRX / EF Civic (1988 - 1991)
1
02-07-2004 11:09 AM