My B20-R build for my EF9 conversion
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Vancouver,WA usa
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
My B20-R build for my EF9 conversion
New pictures of the swap in progress
She's out
Paintless dent repair and no more dent
A look in the back
Nothing has changed
Old motor B20 w/Type-R head
New motor...So clean you can eat off of it
Hungry???
Tranny surgery. LS 5th gear coming out and going into the XSi YS1
Old management vs new
Old pics
https://honda-tech.com/zerothread?id=2046007
Let me know what you think. I will be updating it very soon once I get the rest of the parts for the build.
Here are a few pics of the car as it sits now.
These are REAL EF9 seats that have been recovered to match the fronts so don't try to flame me...I like my **** to match
Modified by jdmboyef9 at 10:15 PM 7/22/2007
Modified by jdmboyef9 at 5:44 PM 9/7/2007
Modified by jdmboyef9 at 9:40 PM 9/8/2007
Modified by jdmboyef9 at 6:37 PM 9/15/2007
Modified by jdmboyef9 at 5:32 PM 10/26/2007
Modified by jdmboyef9 at 12:16 AM 3/15/2008
She's out
Paintless dent repair and no more dent
A look in the back
Nothing has changed
Old motor B20 w/Type-R head
New motor...So clean you can eat off of it
Hungry???
Tranny surgery. LS 5th gear coming out and going into the XSi YS1
Old management vs new
Old pics
https://honda-tech.com/zerothread?id=2046007
Let me know what you think. I will be updating it very soon once I get the rest of the parts for the build.
Here are a few pics of the car as it sits now.
These are REAL EF9 seats that have been recovered to match the fronts so don't try to flame me...I like my **** to match
Modified by jdmboyef9 at 10:15 PM 7/22/2007
Modified by jdmboyef9 at 5:44 PM 9/7/2007
Modified by jdmboyef9 at 9:40 PM 9/8/2007
Modified by jdmboyef9 at 6:37 PM 9/15/2007
Modified by jdmboyef9 at 5:32 PM 10/26/2007
Modified by jdmboyef9 at 12:16 AM 3/15/2008
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Vancouver,WA usa
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (Ilovemyef9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ilovemyef9 »</TD></TR><TR><TD CLASS="quote">I like how u smoke the EVO in the video with your typeRRRRR , hope it pull just as hard as your RRRRRRR.....</TD></TR></TABLE>
My current B20 pulls harder than my ITR
My current B20 pulls harder than my ITR
#7
Honda-Tech Member
Join Date: Apr 2005
Location: Columbus, GA
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (abnaasefmb)
very clean, it looks amazing. Ever think about painting your molding, it looks a little dingy..but then again it's a gorgeous car
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Vancouver,WA usa
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (Deviant-CRX)
Still deciding on cams and engine management before it goes in. I also need another daily driver so I can park this one for a while. The tires have since been replaced with some hancooks and I try to take it easy...it's hard to make them last
As for the molding, I did consider painting them at one time but I like the black offset. Makes the car look at home in it's 1990 form. I am planning on cleaning them up more.
As for the molding, I did consider painting them at one time but I like the black offset. Makes the car look at home in it's 1990 form. I am planning on cleaning them up more.
#10
Honda-Tech Member
Re: My B20-R build for my EF9 conversion (jdmboyef9)
i love the OEM look of this car.
i would rock this badboy in a heartbeat. and im not a huge fan of the EF hatchs.
i would rock this badboy in a heartbeat. and im not a huge fan of the EF hatchs.
#14
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Vancouver,WA usa
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (The AntiRice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by The AntiRice »</TD></TR><TR><TD CLASS="quote">Care to share whats involved wtih what appears to be USDM read seats and headrests? </TD></TR></TABLE>
These are REAL EF9 REAR SEATS!!!!! I had them recovered with my factory Si fabric to match my perfect condition Si front seats. As for the headrest...there are 2 different versions (colors) of the SiR rear seats that I have seen in the time that I worked for a JDM importer. There is the light grey with is the most common, and then a dark grey with a different red stripe pattern. I used to have the light grey but I found a set of the dark grey and it matches alittle better.
The headrest are not just stuck between the cargo cover....I have been flamed for this before and it pisses me off because I'm into the rear seats for almost $400!!
Does it look like they are between the cargo cover???
These are REAL EF9 REAR SEATS!!!!! I had them recovered with my factory Si fabric to match my perfect condition Si front seats. As for the headrest...there are 2 different versions (colors) of the SiR rear seats that I have seen in the time that I worked for a JDM importer. There is the light grey with is the most common, and then a dark grey with a different red stripe pattern. I used to have the light grey but I found a set of the dark grey and it matches alittle better.
The headrest are not just stuck between the cargo cover....I have been flamed for this before and it pisses me off because I'm into the rear seats for almost $400!!
Does it look like they are between the cargo cover???
#15
Junior Member
Join Date: Apr 2007
Location: portland, oregon, US
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (jdmboyef9)
cleansest dopest ef around.
proud to have sat in it.
except i hear that most people think its a clown car haha
proud to have sat in it.
except i hear that most people think its a clown car haha
#16
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Vancouver,WA usa
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (503_EF9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 503_EF9 »</TD></TR><TR><TD CLASS="quote">cleansest dopest ef around.
proud to have sat in it.
except i hear that most people think its a clown car haha </TD></TR></TABLE>
It is a clown car...I'm rolling white Mu-shoes, the red nose is under the hood
proud to have sat in it.
except i hear that most people think its a clown car haha </TD></TR></TABLE>
It is a clown car...I'm rolling white Mu-shoes, the red nose is under the hood
#17
Honda-Tech Member
Join Date: Mar 2006
Location: milwalkie, Oregon, USA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (jdmboyef9)
black trim on a ef look quite a bit better then paint matched. which ecu and cams are you thinking about?
#18
Re: My B20-R build for my EF9 conversion (jdmboyef9)
Nice si i drool over you jdm stuff every time i drive past it.
I live right around the corner,also red 91 si with jdm swap,have you taken it to p.i.r. whats it run .Mine ran 14.1 last time this time ill be using slicks and
a 75shot .Way cool ride don't sell it.
I live right around the corner,also red 91 si with jdm swap,have you taken it to p.i.r. whats it run .Mine ran 14.1 last time this time ill be using slicks and
a 75shot .Way cool ride don't sell it.
#20
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Vancouver,WA usa
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B20-R build for my EF9 conversion (Rd91SiB18ls)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rd91SiB18ls »</TD></TR><TR><TD CLASS="quote">Nice si i drool over you jdm stuff every time i drive past it.
I live right around the corner,also red 91 si with jdm swap,have you taken it to p.i.r. whats it run .Mine ran 14.1 last time this time ill be using slicks and
a 75shot .Way cool ride don't sell it. </TD></TR></TABLE>
Yeah I want to run it again. I just got a new job so I don't have to work weekends now. I was going to go to the track on Friday but it was raining when I left work.
Car last ran a 14.1 aswell at woodburn on street tires, full interior and stock exhaust. Nothing has changed since then but traction is always an issue.
I live right around the corner,also red 91 si with jdm swap,have you taken it to p.i.r. whats it run .Mine ran 14.1 last time this time ill be using slicks and
a 75shot .Way cool ride don't sell it. </TD></TR></TABLE>
Yeah I want to run it again. I just got a new job so I don't have to work weekends now. I was going to go to the track on Friday but it was raining when I left work.
Car last ran a 14.1 aswell at woodburn on street tires, full interior and stock exhaust. Nothing has changed since then but traction is always an issue.