Pandahatch

Does anyone have instruction scans for the Mugen Pro.2 kit install, mainly the door caps and skirts? I want to make sure I have everything with my kit. They were floating around on here years ago, but I can't find anything now. Thanks!

Pandahatch

Helppp

crx_si-r

Should be the same as the wings west kit. Double sided tape. Or drill in bolt holes and bolt it in.

Pandahatch

Not the same at all unfortunately. I had a WW kit way back in the day. I found the directions for the front and rear bumper, but the door caps use a clip on the bottom that I'm trying to figure out what it looks like so I can either find some or make some. Everything fits into OEM locations except for the skirts which screw on.

crx_si-r

What material are the door caps?

When I had my old ed hb I had the ww kit and thought about doing like a plastiweld for putting oem clips from the door molding to help lock them in place.

Just a thought

Pandahatch

They're fiberglass and have studs where the moldings would clip in, but the bottom has cutouts for clips of some sort.

Pandahatch

Anyone?

Pandahatch

Up again

jhmed

I have scans of the instructions if you need them... Shoot me a PM.

Also wondering if you have the front mounting brackets for your Mugen PRO2 bumper? I'm looking far and wide for measurements for them so I can have a pair fabbed.

EDIT: Looks like we're already in touch on FB.

UltimX

iTrader: (1)

Could I get a copy of them as well? I sent you a pm.

4drEF

You know you can upload pictures, PDFs and all sorts of other formats directly into this post. Then others can use the info as well.