89hatcher

iTrader: (1)

here's the before piture of how it looked like in the engine bay with fuse box and all the wires


and heres the piture with the engine harness all tucked


oh and heres the tech

first depin from an extra harness you have you will need (2) pins


this is what you need


then look at the headlight socket


the insert the 2 pins in the 2 holes on the "center" of the socket *don't put the pins in the headlight pins*


then insert a small screw driver on the side of sockt and pry open and it should look like this after you pry it open


then remove the white cap that you just pryed open then tit looks like this


then insert a small screwdriver on the headlight pin and then move the screwdriver with the pin so that you are making the pin torward the outside of the socket


then you push down with the screwdriver and the pin should come out like so

civhatch90

looking better, nice work