crxh22project

Do you really need to use the throttle & clutch clabe.
or is there some mod you can do when doing a b16 swap?
my B16 came with a piece of cable cut on the braket where you mount the cable on the manifoild. ? i need to know so i can order parts because i want to finish the swap this week.

ridexstraight

prettty sure u just used the cables from the ef, but i could b wrong

crxh22project

the reason im asking is, because some write ups on the B16 swap so to do the throttle cable some dont and some say to do both.

kid-honda

iTrader: (2)

To use the stock throttle cable you will need to mod the mounting bracket, I just used a integra one cause I wanted a new tight cable(it felt alot better)
But I did use my stock clutch cable as well as every other person I have done it for or helped do it.

crxh22project

ill try the mod first and if i dont like it ill get the inegra see, i know there had to be a mod. what exactly did you do.?

CrazyKoreanCrx

I USED A 90-93 INTEGRA CABLE FOR THE THROTTLE AND IT WAS TO LONG SO I JUST WRAP IT AROUND IT TWICE AND FOR THE CLUTCH CABLE JUST USE A STOCK CRX BUT YOU MITE NEED TO CUT SOME OF THE RUBBER PART. So for the caps locks.

Rywire

Yup, use a 90-91 teg throttle, or build/buy a custom bracket. To use a crx clutch cable, just trim off the excess on the rubber boot.

Ryan

]{iwi

i mod'd my stock throttle cable and used the b16 mani unmod'd stock clutch cable works fine

ridexstraight

on my friends b16, eg we just used the stock cable, modded the stock bracket, it took a while, but it works

crxh22project

What do i have to do to the clucth cable to make it work.
It seems like it is just too short does anyone have detailed instructions to make it work its a 90 DX

crxh22project

ok i know what to do about the throttle custom braket, I still dont know about the clutch though. how do i take it apart?

1BstdEf9

im using a 91 civic si clutch cable with a 90 tegra clutch cable braket..the instalation is tight. but it fits perfect.might have to force the end of the cable into the braket. n yeah................ 90 speedo cable n clutch cable are a must swap for a b16 swap