tigerr227

Can 94 ls suspension fit my crx i mean the whole setup calipers wheel hub and all what would i have to do to convert. There is a reason why?

Deo

In theory it might bolt up, but you'll run into some issues.

Integras tend to have stiffer spring that when used in your CRX will raise the ride height (fun if you're looking to offroad).

Switching the brakes without the corresponding Prop Valve/Master Cylinder/Booster could screw up your brake balance, increasing braking distances.

If your CRX is an 88, the rear shocks won't bolt up unless you swap Lower Control Arms (though I think you're talking about the front suspension only)

Actually, would you mind clarifying "the whole setup calipers wheel hub and all"? Do you mean front and rear, shocks and springs?

tigerr227

I have lowering springs on the integra so I wanted to use those but the main swap was the 4 lug hub assembly, theres a site that has a 5 lug hub for a stock 94 ls integra assembly and i wanted to put that on the integra set up then that set up on the rex. What would i have to do to get that done . Thanx also for the positive input and suggetions.

90efhatch

I have 90-93 integra suspension on my hatch. I dont think the 94 up front suspension fits the ef chassis. I know it bolts up to the 92 up. I think the rear from 88-00 is the same at least password jdm says it does.

n3h3bkau

The rear is the same excluding the 88 crx. They used the same type as the ITR.

crxcess

you'll need 90-91 crx e-brake cables.

twiztid17thninja

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90efhatch &raquo;</TD></TR><TR><TD CLASS="quote">I have 90-93 integra suspension on my hatch. I dont think the 94 up front suspension fits the ef chassis. I know it bolts up to the 92 up. I think the rear from 88-00 is the same at least password jdm says it does.</TD></TR></TABLE>

you have pics? if so i would like to see plz