Force Fed Racing Project CRX
Trending Topics
#8
Re: Force Fed Racing Project CRX
Here's some things off the top of my head:
We currently have a Borg Warner S372 standard cover Turbo on a twin scroll manifold with a 4 inch stainless steel dump tube. Twin Tial 44mm wastegates with the new Tial Q BOV. We got the older TiAL 44mm but I think we're gonna switch to the new shorter MVR's. The block that is in it is just used to mock up. We have 2 ITR blocks, one is sleeved with the older Darton style sleeves and we're sending the second block out to get the new Golden Eagle sleeves. We got a set of Manly Rods we're gonna throw on the Golden Eagle sleeved block. We are also using an MFactory LSD.
Fuel System:
We got another set of ID2000 comming in the mail from Tony. Fuel Pump we're gonna use a Weldon 2035 with a Weldon FPR.
Body:
Started off as a shell we picked that had a body kit. Its caged but we are putting in full interior. We got some other JDM bits here and there. Carbon fiber hood and rear deck. Custom aero hood releases. Every little hole in the engine bay has been welded and sanded down.
Suspension:
Omni Suspension with custom fabbed traction bar.
We currently have a Borg Warner S372 standard cover Turbo on a twin scroll manifold with a 4 inch stainless steel dump tube. Twin Tial 44mm wastegates with the new Tial Q BOV. We got the older TiAL 44mm but I think we're gonna switch to the new shorter MVR's. The block that is in it is just used to mock up. We have 2 ITR blocks, one is sleeved with the older Darton style sleeves and we're sending the second block out to get the new Golden Eagle sleeves. We got a set of Manly Rods we're gonna throw on the Golden Eagle sleeved block. We are also using an MFactory LSD.
Fuel System:
We got another set of ID2000 comming in the mail from Tony. Fuel Pump we're gonna use a Weldon 2035 with a Weldon FPR.
Body:
Started off as a shell we picked that had a body kit. Its caged but we are putting in full interior. We got some other JDM bits here and there. Carbon fiber hood and rear deck. Custom aero hood releases. Every little hole in the engine bay has been welded and sanded down.
Suspension:
Omni Suspension with custom fabbed traction bar.
Last edited by JohnnyFFR; 06-22-2010 at 02:38 PM.
#9
Re: Force Fed Racing Project CRX
We're gonna shoot alot of videos once it comes out. We got a DynoJet at the shop so we'll definitely post up some dyno vids once we get it on there.
Here's a link to videos of some other cars we've tuned out here in Vegas.
http://lvracingscene.com/forum/showthread.php?t=77117
Here's a link to videos of some other cars we've tuned out here in Vegas.
http://lvracingscene.com/forum/showthread.php?t=77117
#11
Honda-Tech Member
Join Date: Dec 2003
Location: Winchester, VA, USA
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
#12
Honda-Tech Member
#13
#14
Re: Force Fed Racing Project CRX
Here's some pictures of the early body work stages. It started off as a 1991 red CRX Si shell. Sorry alot of these pictures were with cellphones.
Doing some test fitting of the bumper. Mugen style SiR 2 Front Bumper.
Got the shell prepped and ready for paint.
Doing some test fitting of the bumper. Mugen style SiR 2 Front Bumper.
Got the shell prepped and ready for paint.
#15
Re: Force Fed Racing Project CRX
Early Coats of Paint
Mocking up bumper
You can kinda see the Orleans Casino in the background
Turbo comparison - left to right
Precision T3/T4 67-trim, Borg Warner S366 Standard, Borg Warner S372 Standard
Just wanted to throw a cool pic of a Supra on the dyno.
Mocking up bumper
You can kinda see the Orleans Casino in the background
Turbo comparison - left to right
Precision T3/T4 67-trim, Borg Warner S366 Standard, Borg Warner S372 Standard
Just wanted to throw a cool pic of a Supra on the dyno.
#18
Re: Force Fed Racing Project CRX
Custom catch can we fabricated
Custom 4 inch stainless steel downpipe
Tial Q BOV with Aluminum Piping
George workin his magic on the TIG welder.
Custom 4 inch stainless steel downpipe
Tial Q BOV with Aluminum Piping
George workin his magic on the TIG welder.
#19
Re: Force Fed Racing Project CRX
View of the Manifold and twin Tial 44mm Wastegates from the bottom.
ID2000's we got shipped from Tony from T1
A tiny Weldon fuel pump we'll be using.
ID2000's we got shipped from Tony from T1
A tiny Weldon fuel pump we'll be using.
Thread
Thread Starter
Forum
Replies
Last Post
spoon23_JDizM AkA SpOoN20
Want to Buy
35
03-08-2006 04:31 PM