Engine Trouble Code - Am I reading this right?
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2008
Location: Sterling, KS, USA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Engine Trouble Code - Am I reading this right?
So I got the car running but now I have a check engine light, I've looked at several threads about how to read the light but its still a bit hazy. This is an '88 D15 OBD1 computer by the way.
Anyways... it blinks 10 times steadily, then a pause, and then 10 blinks again.. keeps doing that over and over. So I assume that's supposed to be code 10?
Code 10 says: Intake Air Temperature?
Anyways... it blinks 10 times steadily, then a pause, and then 10 blinks again.. keeps doing that over and over. So I assume that's supposed to be code 10?
Code 10 says: Intake Air Temperature?
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2008
Location: Sterling, KS, USA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
whoops, sorry that's what I meant OBD0 - and thanks for the clarification... now as far as the IAT sensor .. does it just need to be replaced usually? Or is there something else that causes the code?
#4
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: (Dman03GT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dman03GT »</TD></TR><TR><TD CLASS="quote">whoops, sorry that's what I meant OBD0 - and thanks for the clarification... now as far as the IAT sensor .. does it just need to be replaced usually? Or is there something else that causes the code?</TD></TR></TABLE>if you just did a swap or had connectors unplugged, make sure you have the correct connector plugged into the IAT sensor - it is a 2-wire connector with red with yellow stripe and green with white stripe wires
Thread
Thread Starter
Forum
Replies
Last Post