engine rebuild
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: williston, fl, usa
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
engine rebuild
alright guys im gonna put new bearings in the motor. when i buy them what do i need, LOwer bearing, upper bearing, main bearings im a little confused as to what i want to purchase. i want to replace all bearings on the crank.
#2
Join Date: Mar 2003
Location: all your post, are belong to us
Posts: 2,565
Likes: 0
Received 0 Likes
on
0 Posts
Re: engine rebuild (zccrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zccrx »</TD></TR><TR><TD CLASS="quote">alright guys im gonna put new bearings in the motor. when i buy them what do i need, LOwer bearing, upper bearing, main bearings im a little confused as to what i want to purchase. i want to replace all bearings on the crank. </TD></TR></TABLE>
If you have to ask... it means you probably dont have a Helm
s manual handy, and you more than likely do not know what your doing.
Go into the FAQ post for the Civic/CRX ef online Helm's .PDF manual.
If you have to ask... it means you probably dont have a Helm
s manual handy, and you more than likely do not know what your doing.
Go into the FAQ post for the Civic/CRX ef online Helm's .PDF manual.
#4
Honda-Tech Member
Join Date: Jan 2002
Location: Stoney Creek, ONT, CANADA
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Re: engine rebuild (ELAMINT5)
#5
Keyboard Humorist
Join Date: May 2002
Location: Granada Hills, Ca, USA
Posts: 9,814
Likes: 0
Received 9 Likes
on
7 Posts
Re: engine rebuild (EFSiR)
Posting a link to a service manual is a no-no.
That's going to lock the thread... maybe even delete it!
IBTL!
As far as the question goes - don't buy ANYTHING until you have purchased (wink wink ) a service manual and have read it.
You need to tear down the motor first before you buy the bearings.
You need to get the codes off the internal parts and maybe do some measuring with plasigauge before you can determine what bearings you need to go get.
That's going to lock the thread... maybe even delete it!
IBTL!
As far as the question goes - don't buy ANYTHING until you have purchased (wink wink ) a service manual and have read it.
You need to tear down the motor first before you buy the bearings.
You need to get the codes off the internal parts and maybe do some measuring with plasigauge before you can determine what bearings you need to go get.
#6
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: williston, fl, usa
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Re: engine rebuild (4drEF)
first off i didnt ask for any smart comments like saying that i dont know how to do it b/c i can do any thing i put my mind and thats a fact anyways i did forget to mention however that my motor is a zc i was mainly asking where to get the zc bearings from thanks to any one that can lend a peice of knowledge
#7
Join Date: May 2004
Location: team panic attack, USA
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Re: engine rebuild (zccrx)
are you going to be doing the work yourself? Its a good idea to replace all bearings and they usually all come in a nice package. Did you previously spun a bearing or is it due to a replacement?
Thread
Thread Starter
Forum
Replies
Last Post
eklum
Honda Civic / Del Sol (1992 - 2000)
17
04-30-2006 07:40 AM