EK armrest in crx.
#1
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Surrey, BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
EK armrest in crx.
Hey all, I just recently picked up an EK armrest and installed it into the rex. It came the stock grey color, so I sprayed it black and recovered the armrest part in black leather. Any questions or comments are appreciated.
Thanks, Tyson.
Thanks, Tyson.
#4
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Surrey, BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK armrest in crx. (erikiksaz1)
Ill try to get a few more pics later today.
I had to cut a few inches off the console side because its too long. So I cut and rounded it to match the stock console the best I could. The sides dont line up perfect at the front, but the seat hides that so you dont see it at all.
But yes, other than that, it fits awesome. It screws into the factory holes at the front too. I just used some rubber stuff (same stuff you put in toolboxes to stop tools from sliding around) into the cubby holder to hide the screws.
I had to cut a few inches off the console side because its too long. So I cut and rounded it to match the stock console the best I could. The sides dont line up perfect at the front, but the seat hides that so you dont see it at all.
But yes, other than that, it fits awesome. It screws into the factory holes at the front too. I just used some rubber stuff (same stuff you put in toolboxes to stop tools from sliding around) into the cubby holder to hide the screws.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Surrey, BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK armrest in crx. (posterchild)
Once you install one, you'll wonder why you never did this before. lol
It gave me some extra storage, since I have no storage slot under my deck. Deck now resides there.
It gave me some extra storage, since I have no storage slot under my deck. Deck now resides there.
#15
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Surrey, BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: (HondaKPX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaKPX »</TD></TR><TR><TD CLASS="quote">wow that looks really good. i think i might do that too now. just 1 question. how did you get it to fit up to the center councel?</TD></TR></TABLE>
Just trimmed the new console to line up with the existing one.
To start, I put the new one in in its stock form, just to see how it would line up. The I drew a rough line about the same shape as the crx console and trimmed the EK one.
Next, I test fit it again, then trimmed as necessary till it fits almost as good as factory.
Took about 4 hours or so, including waiting for paint to dry between coats. Total time to get it in there w/o painting or wrapping the armrest, about 45 mins.
Just trimmed the new console to line up with the existing one.
To start, I put the new one in in its stock form, just to see how it would line up. The I drew a rough line about the same shape as the crx console and trimmed the EK one.
Next, I test fit it again, then trimmed as necessary till it fits almost as good as factory.
Took about 4 hours or so, including waiting for paint to dry between coats. Total time to get it in there w/o painting or wrapping the armrest, about 45 mins.
#18
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Surrey, BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: (fs)
I just used an air grinder. I cut maybe an inch or a bit more, not too much. Just enough to get it to line up with the existing console.
THanks for all the comments guys.
THanks for all the comments guys.
#24
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Surrey, BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK armrest in crx. (fs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fs »</TD></TR><TR><TD CLASS="quote">I just noticed that you have a Y-49 crx. </TD></TR></TABLE>
Im actually planning on painting it in the near future. Im sick of the yellow.
Im actually planning on painting it in the near future. Im sick of the yellow.
#25
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Surrey, BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jonathan_EH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jonathan_EH »</TD></TR><TR><TD CLASS="quote">That looks very very good!
Do you have any pictures where it meets the dashboard? Like an overall shot? </TD></TR></TABLE>
What do you mean? In the pics it shows where it matches up with the stock shifter console in the crx.
Do you have any pictures where it meets the dashboard? Like an overall shot? </TD></TR></TABLE>
What do you mean? In the pics it shows where it matches up with the stock shifter console in the crx.