gregv

hey guys

need some help fine tuning my parts list here for a rebuild of my '91 JDM DOHC ZC.
Please feel free to point out any mistakes or add corrections.
I know this is old news but I just want to make sure I get the right stuff the first time.
As well, I already have one running in my '91 Civic, so I do know about the distributor
cap/ rad hoses etc.

thanks

--------------------------------------------------------------------------------------------------
head gasket set 88-89 Integra
block gasket set 88-89 Integra
pistons & rings 88-89 Integra
main & rod bearings 88-89 Integra
thrust washers 88-89 Integra
valve springs/seals/
retainers/keepers 88-89 Integra

water pump 88-91 Civic/CRX Si
thermostat & washer 88-91 Civic/CRX Si
water pump inlet
pipe o-rings 88-91 Civic/CRX Si
timing belt 88 Prelude 2.0i
-------------------------------------------------------------------------

thanks again for any positive input

cheers

greg v

SteveeeO

this isn't the rebuild list, but it does include many parts of it
http://thenew.gamesbbs.com/~dmoore/z...20Parts%20List

gregv

Actually, the only thing that has me confused is the head gasket;
will the 88 Teg work, or do I use the 88 Prelude as I have seen
mentioned in a few websites??

thanks again

greg v

SteveeeO

89 teg head gasket

DaGoatCRXSi

Dont use anything from teh prelude....I got a timming belt that never worked right...had to refferance part number from factory to get the right one

gregv

Conversely, I compared the '88 Prelude 2.0i timing belt (part #14400-PK2-004)
to what came on my'91 ZC, and it was a match (right down to the part number
printed on the belt itself); go figure.

thanks for all the responses

greg v

Denny317

i have a 88-91 crx water pump laying around that is practically new, let me know if you're interested.

gregv

Denny317

thanks for the offer, but for what it would cost to ship it
I could buy one new!

cheers and thanks anyways

greg v

philly-O

http://www.quickhonda.net/indexNEW.htm helpful site

EFsleeper

My prelude belt worked great, still to this day. Are you sure they gave you a belt off of an SI lude?

redzcstandardhatch

ive had two prelude belts, and put them on another one. we made sure to count the teeth evertime, they were right on. i have also read that you use the 88 prelude head gasket, but i read also somewhere you can use any d series, but i'm not sure that is true.