DA seats?
#1
Honda-Tech Member
Thread Starter
DA seats?
so it has been imposoble to find a replacement drivers seat for my 90 civic si... But I foubd a guy near by with 90 integra with two great looking seats.... So my question is would any of the holes match up???
#2
Honda-Tech Member
Join Date: Oct 2008
Location: Milwaukee, Wi, usa
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA seats?
its not a direct bolt on,2 of the bolts fit then u got to fab up the other 2. I would drill the other 2 all the way through the floor and use a big washer and a bolt and then just nut the top
#6
Re: DA seats?
you could always swap the seat pans. they they would bolt up how there suposed to and not all rigged up. also if your seatbelt is part of your seat and not bolted to the car you might not wana just drill holes and use big washers to hold you in the car.
Trending Topics
#10
Honda-Tech Member
Re: DA seats?
exactly how bad arrr the si seats? ghetto rigging seats is retarded IMO. pretty sure only the 2 right side mounts will work. and drilling out the flooboard holes isnt a very good idea..just saying. keep looking for ef seats
#11
Honda-Tech Member
Thread Starter
Re: DA seats?
the entire bottom of the pan is just blown out the metal is torn in a few places and the back of the seat one side is broke off...
i have been looking FOREVER for a stock ef seat nooo such luck!
i have been looking FOREVER for a stock ef seat nooo such luck!
#12
Honda-Tech Member
Re: DA seats?
Another option is to mate the EF rails to the DA seats.
It is possible to make a bracket for the rails, without welding.
You just have to be... Creative.
It is possible to make a bracket for the rails, without welding.
You just have to be... Creative.
Thread
Thread Starter
Forum
Replies
Last Post
00pandaGSR
Honda CRX / EF Civic (1988 - 1991)
14
11-21-2007 04:46 PM