DA integra knuckles in my 91 crx DX
11-19-2006, 09:10 PM
#1
Thread Starter
Join Date: Feb 2005
Location: hmb, ca, usa
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
DA integra knuckles in my 91 crx DX
i need some advice about putting DA integra knuckles for my Crx Dx. im planning in swapping in them over since im swapping a B20b motor into it. they're bigger and positive camber if swapped but the car would be lower so the camber shouldn't be a issue right? i just need advice and ideas if i should do it. swap the whole knuckle with the calipers and the control arm of a integra. Anybody have any comments?
11-20-2006, 02:59 PM
#3
Re: DA integra knuckles in my 91 crx DX (JoSi)
camber worked out great. my car is 2" lower and camber is about neutral.....can't remember the alignment specs offhand.
keep your stock lca's
it's a good upgrade, DO IT
keep your stock lca's
it's a good upgrade, DO IT
Thread
Thread Starter
Forum
Replies
Last Post
hammergunner
Honda CRX / EF Civic (1988 - 1991)
6
02-19-2009 10:31 PM
Steve91
Honda CRX / EF Civic (1988 - 1991)
16
10-23-2002 12:09 PM
