speedjunkeez

I just recently picked up a cusco oil catch can for my b16a ef..

The kit never came with instructions......So pls. correct me if i'm wrong..

So in order to set it up correctly, I have to plug up the intake manifold port(the
port where the pcv line goes to the manifold) and plug up the oil separater (black box located
below the intake manifold) with an aluminium plug that came with the kit...
Then connect a hose from the valve cover vent to the oil catch can...then
connect another hose to the other side of the oil catch can to the intake tract before TB....
Pls. correct me if i'm wrong here...I've been checking out other cars on the net that
is equipped the cusco oil catch can...They all have the intake manifold port from the
pcv line plugged up...And valve cover vent connected to the oil catch can..
What do i do with the oil separter? Do i plug it up? Does the return line connects to the
intake before the TB? Pls. point me on the right direction with this...Thanks..

-Ron

nomorecrx

you are correct

BoostedED9

https://honda-tech.com/zerothread?id=72491 this is from the FI forum.... it shows how to do it......