waner68

ok heres the deal i have a 91 crx hf with b18a1 in it ordered the ecu conversion harness still using the stock engine harness wanted to repin the obd0 harness to the obd2 dizzy anyone done this before i have the rywire schem. for the engine harness but i have no clue on the dist. wires they are as follows on the dist. orange....white/blue...blue..orange/green...yellow/green...black...black/yellow....white so i geuss what i really need is the pinout for the dist. plug of the actual wires going into the dist
oh and the crx white wires are the same size no bigger one on my car but i can figure out which one goes to where on the cars harness
any help would be appreciated


Modified by waner68 at 6:34 AM 4/10/2008