90laser_rst

Would a front bumper off an 88 CRX si bolt up to my 88 wagon? Or would I have to swap fenders too, would the fenders even bolt up right?




Modified by 88wago5sp at 8:20 PM 9/30/2006

90laser_rst

Anyone?????

SHUTTLE

just keep it stock look at my whip dont do a hack ricer job
OLDSKOOL

Tippyman

You whip is ghey!

Tippyman

seriously though, do you need a camber kit or sumthing? WTF is up with those slanted rims?

SHUTTLE

MY RIMS COST MORE THEN YOU CAR FUCKTARD

Tippyman

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmshuttle &raquo;</TD></TR><TR><TD CLASS="quote">MY RIMS COST MORE THEN YOU CAR FUCKTARD </TD></TR></TABLE>

STOP YELLING OVER THE INTERWEB!!!

I love the rims, I just think you need to get a camber kit or sumthing. They are slanted. You must have like an inch of contact patch. Do your tires wear quickly? Maybe it's just the pic or sumthing... geez...

SHUTTLE

they are my show wheels they have only seen about 30 miles on the tires. i roll on BBS mesh for my daily grind or my 91 SI rims. also had GALE SPEEDS till some ******* stole my other project car so now im going to get SSR MK2'S for the next set. then who knows what else i will want yea i need a camber kit but i work to much and have very little time since i go too alot of shows and meets. sorry about the expletive tard but lets see your ride???

Tippyman

I wasn't criticising ur ride, I love it. Seen it many times and always enjoy a clean wagovan. I just wanted to know why the rims were slanted. You know, what the story was. Whether it was a simple camber problem or sumthing weird.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmshuttle &raquo;</TD></TR><TR><TD CLASS="quote"> sorry about the expletive tard but lets see your ride??? </TD></TR></TABLE>

Lol, in the sig. LO BUK!

Solscud007

I dont think it will work. the rake of the wagon fenders and hood would require a lot more material added to the crx to match.

SHUTTLE

it ahs been done but looks like **** to me i hate mis matched swap jobs keep it OEM

SETI20

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmshuttle &raquo;</TD></TR><TR><TD CLASS="quote">they are my show wheels they have only seen about 30 miles on the tires. i roll on BBS mesh for my daily grind or my 91 SI rims. also had GALE SPEEDS till some ******* stole my other project car so now im going to get SSR MK2'S for the next set. then who knows what else i will want yea i need a camber kit but i work to much and have very little time since i go too alot of shows and meets. sorry about the expletive tard but lets see your ride??? </TD></TR></TABLE>

Wow I'm seriously impressed with your ability to blurt out brand names.
Too bad whatever brand you use that camber is still retarded. Throw in a brand name camber kit to fix that.
Also you might need some new JDM hood hinges. You seem to have the body-panel misalignment problem.
Wreck recovery? Or do you just suck at building cars?

4dOoR-Ex

dam y the expletive are you all so fast to.put people down with wagons. aroung my way( bk ) thers a dude with a type r in his ****...sleep on that...nice wagon its just the color gotta go...

jhota

the bumper will bolt up. the fenders will not.

but the bumper will have a rather large gap at the top - the wagon bumper has a plastic fill strip on top that the other Civics don't have.

FernEF

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman &raquo;</TD></TR><TR><TD CLASS="quote">You whip is ghey! </TD></TR></TABLE>

u serious...?? i think that wagon looks good

crxnj

only 2 people answered this guys question..

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Solscud007 &raquo;</TD></TR><TR><TD CLASS="quote">I dont think it will work. the rake of the wagon fenders and hood would require a lot more material added to the crx to match.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jhota &raquo;</TD></TR><TR><TD CLASS="quote">the bumper will bolt up. the fenders will not.

but the bumper will have a rather large gap at the top - the wagon bumper has a plastic fill strip on top that the other Civics don't have.</TD></TR></TABLE>

the rest is just bullshit

Tippyman

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FernEF &raquo;</TD></TR><TR><TD CLASS="quote">

u serious...?? i think that wagon looks good</TD></TR></TABLE>

You left out the " " (H-T's sarcasm smiley).

I love his car.

KillSwitch

im not feeling the way the hood is popped up in the back.... i think that looks stupid. but i do like his car

Akiraboy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jhota &raquo;</TD></TR><TR><TD CLASS="quote">the bumper will bolt up. the fenders will not.
but the bumper will have a rather large gap at the top - the wagon bumper has a plastic fill strip on top that the other Civics don't have.</TD></TR></TABLE>
Agreed. You need to adapt the top half filler from the wagon bumper onto the crx bumper like Jdmshuttle's wagon.

Please understand that this is NOT a factory bumper but I am using this image for illustration purposes. This is basically how the side view will look unless you modify the bumper.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Solscud007 &raquo;</TD></TR><TR><TD CLASS="quote">I dont think it will work. the rake of the wagon fenders and hood would require a lot more material added to the crx to match.</TD></TR></TABLE>
Agreed x2, the wagon fenders are wagon only for sure.

harmonator84

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.speaker &raquo;</TD></TR><TR><TD CLASS="quote">only 2 people answered this guys question..
</TD></TR></TABLE>
Agreed
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmshuttle &raquo;</TD></TR><TR><TD CLASS="quote">MY RIMS COST MORE THEN YOU CAR FUCKTARD </TD></TR></TABLE>
It looks like those rims where photo shoped in or something. Look at the red stripe.hmm looks hacked to me.

I have a friend that put crx fenders on his wagon. I will try to snap some pictures of it.

Mugencrxsir1

To make it fit properly you need the crx fenders and the front bumper. A better fit would be a civic HB front bumper and fenders. The 88 civic hb bumper might fit well with out the civic HB fenders.

Just remeber the civic and crx from 88-91 have basically the same front end, except the corner lights/fenders are different, and thus the bumpers are different, the hoods are exactly the same. You have to miss/match, but the wagon has the same style front bumper as the civic hb.

jhota

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugencrxsir1 &raquo;</TD></TR><TR><TD CLASS="quote">To make it fit properly you need the crx fenders and the front bumper. A better fit would be a civic HB front bumper and fenders. The 88 civic hb bumper might fit well with out the civic HB fenders.

Just remeber the civic and crx from 88-91 have basically the same front end, except the corner lights/fenders are different, and thus the bumpers are different, the hoods are exactly the same. You have to miss/match, but the wagon has the same style front bumper as the civic hb.</TD></TR></TABLE>

the wagon fenders and bonnet are longer (front to rear) than other Civics. they just aren't shaped the same.