Cable to hydraulic question
#1
Honda-Tech Member
Thread Starter
Cable to hydraulic question
So I'm considering converting my car to hydraulic. I'm havin a hard time researching how to do it. Can anybody point me in the right direction. Any help would be greatly appreciated
#3
Honda-Tech Member
Thread Starter
Re: Cable to hydraulic question
Yeh and also its really hard to find a decent cable tranny for some reason so I just want to convert it and save me the trouble. I also want to start auto cross in the summer
#5
Honda-Tech Member
Join Date: Jan 2006
Location: Ontario, California, United States
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cable to hydraulic question
The way I did it in my CRX was to get pedals out of a car that was hydraulic and put them into my crx, then add master cylinder, tubing, slave and you're good to go.
#6
Honda-Tech Member
Re: Cable to hydraulic question
indeed they do ^
could only find the b-series conversion on hasports site, so i found the d-series kit elsewhere.
http://www.jhpusa.com/store/pc/viewP...&idproduct=442
could only find the b-series conversion on hasports site, so i found the d-series kit elsewhere.
http://www.jhpusa.com/store/pc/viewP...&idproduct=442
#7
Re: Cable to hydraulic question
i have this one
http://www.suja1motoring.com/product...px?productId=1
http://www.suja1motoring.com/product...px?productId=1
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: Cable to hydraulic question
Was it a easy installation or somewhat difficult. I never had to do it before sovim a complete noob to the situation
Thread
Thread Starter
Forum
Replies
Last Post
diamondstarsforever
Honda CRX / EF Civic (1988 - 1991)
35
10-11-2010 01:15 AM
Efjdm88
Honda CRX / EF Civic (1988 - 1991)
6
03-07-2010 09:54 AM
wickedEFguy
Hybrid / Engine Swaps
1
01-02-2003 07:14 AM