B20 vtec and D16 swap obd1 compatability. ? 's
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
B20 vtec and D16 swap obd1 compatability. ? 's
Can someone provide me with a list/link of parts I can pull off my A6 block Vzw head mini me swap
To use on my B20b vtec swap. Both are obd1 any help would be greatly appreciated. Thanks
This is going into a 1988 Crx Si. Thanks
To use on my B20b vtec swap. Both are obd1 any help would be greatly appreciated. Thanks
This is going into a 1988 Crx Si. Thanks
#3
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2009
Location: Evil Empire,CA
Posts: 9,673
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
im no rocket scientist but i believe that d-series and b-series engine parts are not interchangable...it could also be that your question doesn't make any sense to begin with
#4
Honda-Tech Member
Re: B20 vtec and D16 swap obd1 compatability. ? 's
B-series parts are nor interchangeable with D-Series.
the only parts you can re-use from the mini-me swap is the harness and ecu, bu the motor will not run right. Come on now, its common sense. stop trying to cut corners and get what is needed to do the swap
the only parts you can re-use from the mini-me swap is the harness and ecu, bu the motor will not run right. Come on now, its common sense. stop trying to cut corners and get what is needed to do the swap
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
You know what I love it when people talk like they know what they are talking about but really don't??? I pulled my D16Z6 Vtec Solenoid off and it bolted right up to my B16A2 head......hmmmmmmmm wonder what else. Good thing I'm cutting corners cause I just saved myself some money on a solenoid that I can use somewhere else. Thanks for the useful info.
#6
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
You know what I love it when people talk like they know what they are talking about but really don't??? I pulled my D16Z6 Vtec Solenoid off and it bolted right up to my B16A2 head......hmmmmmmmm wonder what else. Good thing I'm cutting corners cause I just saved myself some money on a solenoid that I can use somewhere else. Thanks for the useful info.
#7
Honda-Tech Member
Re: B20 vtec and D16 swap obd1 compatability. ? 's
Ahhhhhhh newbies, yes it bolts up. What's your point? Look at the pressure switch placement, look different? Don't try and school me because your too cheap to do thngs the right way. Just cause something bolts up doesn't mean it will work right. I know it bolts up whether it works right I don't know because I do things the way theyare supposed to be done. I see more posts about issues with this build coming soon
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2008
Location: Quantico, VA
Posts: 1,117
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
were u born stupid or did special ed class not teach u anything? ur tryin to talk **** to two guys on here tht have always had good tech, nd know there **** nd have build threads, so my question is where the F is ur credibility? they earned there's
#9
Re: B20 vtec and D16 swap obd1 compatability. ? 's
if your going to do the swap do it right! there are so many parts out there that you can find all the parts you need for cheap, my buddy the other day sold his b16a solenoid for like 10 or 15 bucks, so come on..... plus dont post on here with questions that your going to get butt hurt on when people give you there opinion....which the opinion everyone has is dont cut corners bc its goin to suck in the long run,....trust me when have either tried the shortcuts at sometime in our life or know someone who has, and trust me when doing a swap its not worth it.......so to sum it all up DO IT RIGHT
#10
Honda-Tech Member
Re: B20 vtec and D16 swap obd1 compatability. ? 's
If, you really want you can gut your z6 distributor and swap the Internals into a junk obd1 or obd2 distributor. Your sensors are the same. Aside from that, that's it
#11
Re: B20 vtec and D16 swap obd1 compatability. ? 's
there are plenty of things that will work from your d series to the b series just about every sensor will work fuel injectors will work fly wheel and pressure plate bolts , the d series vtec Solenoid does bolt to the b series head i will give you that but before making a jackass statement you should look up the flow and pressure rate and you would see that they are different if you use the d series solenoid on your b20vtec your cams are gonna burn
#12
Honda-Tech Member
Re: B20 vtec and D16 swap obd1 compatability. ? 's
there are plenty of things that will work from your d series to the b series just about every sensor will work fuel injectors will work fly wheel and pressure plate bolts , the d series vtec Solenoid does bolt to the b series head i will give you that but before making a jackass statement you should look up the flow and pressure rate and you would see that they are different if you use the d series solenoid on your b20vtec your cams are gonna burn
#13
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
Not trying to be a dick but I also want to get "correct" info. First nothing can be used and now some things can be used. How I look at it is if your not going to give me info about the info I inquired about butt the hell out and quit stirring the pot with your worthless info. I never said they didn't know anything but it's apparent you don't- otherwise rather than wasting the bandwith with pointless drabble how about answering the question??? So I guess "now" there are parts that can be used........hmmmmmmmmmm.
#14
Honda-Tech Member
Re: B20 vtec and D16 swap obd1 compatability. ? 's
I stand by what I sad do it right. I hear people say the combo doesn't last but I'm going strong on 4yrs with my lsv because I did it right. You want your swap to last, then do it right.
#15
Honda-Tech Member
Join Date: Aug 2008
Location: Quantico, VA
Posts: 1,117
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
First off chucklehead ease up on the Red Bull and relax dude. I believe I read in his post and I quote:"B-series parts are nor interchangeable with D-Series."
Not trying to be a dick but I also want to get "correct" info. First nothing can be used and now some things can be used. How I look at it is if your not going to give me info about the info I inquired about butt the hell out and quit stirring the pot with your worthless info. I never said they didn't know anything but it's apparent you don't- otherwise rather than wasting the bandwith with pointless drabble how about answering the question??? So I guess "now" there are parts that can be used........hmmmmmmmmmm.
Not trying to be a dick but I also want to get "correct" info. First nothing can be used and now some things can be used. How I look at it is if your not going to give me info about the info I inquired about butt the hell out and quit stirring the pot with your worthless info. I never said they didn't know anything but it's apparent you don't- otherwise rather than wasting the bandwith with pointless drabble how about answering the question??? So I guess "now" there are parts that can be used........hmmmmmmmmmm.
#16
Honda-Tech Member
Re: B20 vtec and D16 swap obd1 compatability. ? 's
That's why I didn't originally mention them, those are parts I Would swap with new ones to begin with.
Last edited by crx_si-r; 12-18-2009 at 10:45 AM.
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
(Crank,girdle,rods,pistons) nothing on the outside of the block. If someone had stated that you can actually
Use d series stuff on b series It would've been appreciated. But apparently that's commen knowledge.
#18
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
there are plenty of things that will work from your d series to the b series just about every sensor will work fuel injectors will work fly wheel and pressure plate bolts , the d series vtec Solenoid does bolt to the b series head i will give you that but before making a jackass statement you should look up the flow and pressure rate and you would see that they are different if you use the d series solenoid on your b20vtec your cams are gonna burn
Switch from a b series but you can use the d series solenoid?
#19
Re: B20 vtec and D16 swap obd1 compatability. ? 's
#21
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
This forum is cracking me up. Always heard it was a place to get info/help but I was lucky enough
today to find out that there's just certain stuff you should know and if you don't than don't ask on this forum
cause everybodys on this forum would much rather make an uninformative comment than actually help us stupid people out. Bwaaaaaahaahaa Too freaking funny.
today to find out that there's just certain stuff you should know and if you don't than don't ask on this forum
cause everybodys on this forum would much rather make an uninformative comment than actually help us stupid people out. Bwaaaaaahaahaa Too freaking funny.
#23
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
Maybe this will clear things up. Read it: Then come back with a uneducated icon??? Bwaaahaaaahaaa. Oh snap !!!!
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/d16z6-upgrade-vtec-solenoid-2207340/
#24
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Dover, N.H., Good Ole U.S.A
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 vtec and D16 swap obd1 compatability. ? 's
Ahhhhhhh newbies, yes it bolts up. What's your point? Look at the pressure switch placement, look different? Don't try and school me because your too cheap to do thngs the right way. Just cause something bolts up doesn't mean it will work right. I know it bolts up whether it works right I don't know because I do things the way theyare supposed to be done. I see more posts about issues with this build coming soon
#25
Honda-Tech Member
Re: B20 vtec and D16 swap obd1 compatability. ? 's
do you have an obd2 ecu to run your B20Vtec? if not then shut up and listen. obd1 ecu's require an oil pressure switch. DING DING DING, i think school is in. Stop wasting our time and do what ever you want with your car. its up to you how you want to run it.