Fo-Do Fanatic

I don't wanna spend $140 on Hasport for their shift linkage when I can just cut and weld my own D series ones and make them work. How much is the linkage supposed to be shortened and where should I shorten it at? Pictures would be amazing too.

I've looked for a while, even in the FAQ, and didn't find anything.

KINGVEM^^ED6

iTrader: (1)

get a da one!

repingjdm

go buy da shift linkage cut it to the length u need it to be. i bolted the da up and saw how much i need to cut.http://www.performanceforum.com/wesv...r/shifter.html

BiG ChOr!Zo

iTrader: (1)

http://www.performanceforum.com/wesv...r/shifter.html

jdmsuckah

try innovatibe they r way cheaper than hasport!!! i have one and it works fine

hatchet_honda

i have the hasport linkage. works great but i have money. i bought an ls trans once that had a welded linkage still attached to it. seems as if they used the da linkage and cut it in half then places a piece of pipe in the middle and welded it however long it needed to be.

Jaime 91SiB18

B series, cut weld, done.

Fo-Do Fanatic

Innovative and Hasport are about the same price. I'm just going to cut and reweld the DA one I just picked up. Hopefully I don't screw it up lol

.Manny.

iTrader: (1)

The DC linkage works great too. I think you cut 2 3/8"

Smooooth!

Fo-Do Fanatic

Can I use the skunk2 short shifter I have that I bought for my single on the B series shift linkage?

Deetz

I spent $60 on an ebay auction for an actual oem ef8 shift linkage for my crx, perfect fit!

Richyrich1988

i have a b16 in my crx....had a weld job shift linkage before i bought my hasport one...and lemme tell ya...hasport knows their stuff...they do this for a living haha....my welded one's broke after about a year and i dident weld em cause im no welder i took em to a shop....got them re-welded and it happened again....just suck it up pay the money and you wont have to get another shift linkage ever again....that's how i see it.