habanerored06si

Wow.

H22 in a CRX? You must make alot of people feel slow/like **** lol.

rihia

Interesting that I found this... Im in Australia not much of this has been done down here and I'm pretty sure I'm the first to have a h2d crx!

Anyways I have the bisimoto complete kit... Should be putting the engine in this weekend, was it easy to lower the car down to the engine or do you think lowering it from the top will be just as easy?

Any tips you can give will be greatly appreciated!!!! I've been searching the net for as much info as I can find.... Can't wait to have this baby up n runnning

My_EFsedan

cambo represent bro. looks monstrous in the front photo of the car without the hood.

CRX91SE

this picture is boss, look at that motor !

AyO Deebo

i would just drop it in from the top. I only put it the way i did because i didn't have an engine hoist at the time lol. Tips ... hmmm have fun banging in the driver side in for clearance lol!!!

gotta represent my nationality to the fullest ya digg!!!

AyO Deebo

i would just drop it in from the top. I only put it the way i did because i didn't have an engine hoist at the time lol. Tips ... hmmm have fun banging in the driver side in for clearance lol!!!

gotta represent my nationality to the fullest ya digg!!!

rihia

is it just the balance shafts that hit ?

MexiChriS

Could you get some vids of it running and out driving? Also some close up pics in the engine bay top and bottom shots would be nice. Never seen a H2D in a CRX been waiting long to see one, as I want it in mine too!! With a nice built D series LSD transmission of course

Well I can't dare to cut the hood; just thinking on rain to the damage of engine and the mess it would cause/bring underneath the cut hood, drags me away and more towards Explicit Speed Performance products... Have you had any concerns or issues since cutting your hood? Please share

0Janet@bisimoto

We appreciate the support!

AyO Deebo

i removed the balance shaft, but you gotta clear it for crank pulley and tensioner bolt

91EFH22

I have ESP's mounts and I can close my hood completely. As for Bisimoto I can only say you WILL have to cut the hood. From what I hear their products are great though. ESP's stuff was great but I waited 16 weeks to get it.

AyO Deebo

yeah man like i said on the 1st page bought the esp alternator kit and traction bar and it took 10 months to get my sht

91EFH22

What about just shimming the mounts down? Only thing youd have to do is reweld a new rear T bracket...

AyO Deebo

this swap is not like a regular h swap, its same a h2b thats why it sits up like that beast mode

91EFH22

I realize that but like I said why couldnt you just shim the mounts down? Put quite a few washers or some kind of block between the mounts and the motor/trans?

AyO Deebo

you can do that, but i rather have my motor sit higher than lower, so i can keep my car low and looking nice with this swap. im not really worried about hood clearance anways gonna mock up a hood sooner or later.

91EFH22

Gotcha, just throwing it out there. Id like to see what you do as far as mocking up one, PICS!

AyO Deebo

need pics of the hood clearance you mean?

91EFH22

Ohh I know it doesnt clear for **** lol. Ive seen that pic before I was saying id like to see how you mock up a hood that "fits" without cutting. I thought thats what you meant by ill fab one up.

beansandrice

There is a company named bullfrog racing. They make false claims in power mods but there is a cowl induction hood that is made by them. It is for the 88-91 crx, civic. It looks decent. Not great but not horrible. Look for them. As far as using bushings to shim the engine down you will run into problems with the rear mount. Not only that but destroy the polyurethane mounts.

The bisimoto H2XX kits are good for ground clearance but suck for hood clearance.

beansandrice

Call bisi. He ran that hood for ever on the first blue all motor crx. Back in the day before the header drama.

AyO Deebo

ill get vids up soon, diablo 3 getting the best of me right now lool. Ill get pics of ground clearance soon, its not bad i can actually lower it pretty low without any problems. I posted pics of hood clearance.

ima go look that up when i get home hopefully it looks nice.

AyO Deebo

couldnt find bullfrog racing hood , can u show me a link?

and what yall think about BBS RS's should i stick with my SSR Type X or these bbs's

beansandrice

[Img]http://t2.gstatic.com/images?q=tbn:ANd9GcSPizaZEPWWpGyLCAqrovcIqDypbEEC9 spbKA1ismVM-jWfkLnyZf1PMRc[img]

I hope one of these work... Its called the gude hood made by bullfrog.

http://t2.gstatic.com/images?q=tbn:A...jWfkLnyZf1PMRc

AyO Deebo

i hope it fits, i found a guy selling a bullfrog hood locally lol. buying it today and hopefully it fits