Wht/Blu - ICM to Coil - Whats this signal look like?
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Griffin Ga
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Wht/Blu - ICM to Coil - Whats this signal look like?
The question arose, and after about 3 days of searching through Help/icm/coil/no spark issues, i received no answer.
To trigger a coil inside of the distributor, what kind of signal does the ICM send to the coil?
Is it 3.3v? 5v? 1v? 12v? Ground?
To trigger a coil inside of the distributor, what kind of signal does the ICM send to the coil?
Is it 3.3v? 5v? 1v? 12v? Ground?
#2
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Griffin Ga
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wht/Blu - ICM to Coil - Whats this signal look like?
Below is the circut, and the one i am interested in.
This is the circut B(coil) to 2(ICM)
This is the circut B(coil) to 2(ICM)
#5
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Griffin Ga
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wht/Blu - ICM to Coil - Whats this signal look like?
i was considering using the ICM as a trigger for a coil on plug setup using the cap/rotor to select the appropriate coil.
Thread
Thread Starter
Forum
Replies
Last Post