VTEC WIRING!!!!
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Somewhere in, PA, usa
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
VTEC WIRING!!!!
I have a 94 4 door civic sohc non vtec(D15) and going to swap it for a D16Z6 but need to know how to hook up the wiring to activate the vtec.
Any help would be appreciated
Any help would be appreciated
#6
Re: (eg8tuner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg8tuner »</TD></TR><TR><TD CLASS="quote">i belive you have a p06 and would need a p28 for vtec</TD></TR></TABLE>
You can get the p06 chipped for vtec.
You can get the p06 chipped for vtec.
Trending Topics
#10
Honda-Tech Member
#11
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
You can use an automatic P28, but you will throw a CEL for the automatic transmission lockup solenoid, you can convert the ECU to a 5 speed quite easily though, see pic below
No. Automatic D16Y8s have a different Intake compared to the manual version. All others are the same regardless of transmission.
technet.ff-squad.com
Originally Posted by rukawa1one
doesnt he also need the intake manifold from a manual for this swap as well?
Originally Posted by eg6batfoi
where did u get that pic of the wires
#13
Re: VTEC WIRING!!!!
hi guys i need help i have a jdm ecu honda h22a P13 automatic it has 4 socket and i really dont know which is for i want to know the wiring diagram from ecm to sensors if there photo will really great it will make my life easy thank any info it will be great for me
#15
Re: VTEC WIRING!!!!
ok i need a lot of help and i have a lot of ?'s. sorry. i have a 98 civic coupe which im assuming is obd2a. i bought the car with no motor and the wiring harness to the engine cut. im dropping in a 0bd1 b16 with gsr cams and so im going to run an obd1 p72 ecu. ive got a jumper harness for the ecu to plug in the car. the car was origonally a d16y7 so i have to run the vtec wires to the ecu. so can i just splice the vtec wires into the jumper harness? ive got an old gsr obd1 harness that i will b using the injector dizzy and alternator plugs. will the wires match up to a d series obd2 civic engine harness?im going to solder all the connections at the cut point and use shrink wrap. i just want to make sure the extra sensors on the d series that wont b hooked up will not effect the way the motor runs.
And the ultimate question... is there an easier way to do this that wont cost me hundreds of dollars just to hook everything up?
thank you and please help!!!! i dont want to use the guess and check method on this one.
any help will b appreciated
And the ultimate question... is there an easier way to do this that wont cost me hundreds of dollars just to hook everything up?
thank you and please help!!!! i dont want to use the guess and check method on this one.
any help will b appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Dan222000
Honda Civic / Del Sol (1992 - 2000)
20
02-26-2012 02:53 PM