I have bought a replacement OEM muffler. Should I put sealant on the gasket like high temp copper whatever gasket maker? What would they do at Honda dealership if replacing the muffler? Sealant or no sealant (dry)? Thanks..just need a quick reply! Civic '98 DX D16Y7
No clue what's the "right way" but I'm chiming in because although I ALWAYS just use the donut gasket with no sealant they do make an exhaust pipe specific sealant. I saw it at the local parts store yesterday while looking for silicone grease.
I've read "Permatex 81878 Ultra Copper Maximum Temperature RTV Silicone Gasket Maker" people have used on this gasket. To keep it from leaking exhaust gas by "sealiung" is that the idea or why would I use this? But don't know if supposed to use it on this gasket.
the gasket sound be fine if it's just a flat gasket for the axel back portion. I've used run of the mil RTV to seal up my cracked doughnut gasket in the past worked for me but that's because it was damaged.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.