passenger window switch bad?
#1
New User
Thread Starter
Join Date: Jun 2001
Location: not near you,, maine, us
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
passenger window switch bad?
so my pass. window has been broke for the longest time and i know they had a recall on the motors cause they were bad so i assumed that was the culprit. i replaced the motor assembly on to find that was not the problem. it does not worl from the driver side nor the pass side switch's. my window is slightly open cause i couldn't put the ***. in and the window up the way it was. i have a haynes manual and am trying to use a cordless dril battery to find the wires that make it go up. checked all the fuses so now i'm left w/ the switch must be bad.
IS THERE A WAY I CAN USE A DRILL BATTERY TO SHUT THE WINDOW AND IS THERE A WAY TO FIND IF THE SWITCH IS BAD. i don't know how to read the haynes eletrical scematics. please help
IS THERE A WAY I CAN USE A DRILL BATTERY TO SHUT THE WINDOW AND IS THERE A WAY TO FIND IF THE SWITCH IS BAD. i don't know how to read the haynes eletrical scematics. please help
#2
Re: passenger window switch bad? (clean)
You need to consider both the passenger and driver switches for the bad window as a fault in either could render both inoperable. The service manual (see link below) describes a series of continuity tests (need multimeter) that will tell you which if any switch is bad.
http://hondatech.info/downloads/Auto/Manuals/Civic/
http://hondatech.info/downloads/Auto/Manuals/Civic/
#3
New User
Thread Starter
Join Date: Jun 2001
Location: not near you,, maine, us
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Re: passenger window switch bad? (RonJ@HT)
im retarded when it comes to electrical, i have no idea how to use a multimeter. i do understand what you are saying though
#4
Junior Member
Theres a plug that goes from the motor to the harness in the door. Just unplug that and hit it with two wires on a battery. One way makes it go up, the other makes it go down.
#5
New User
Thread Starter
Join Date: Jun 2001
Location: not near you,, maine, us
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Re: (OMGWTFBBQ!)
yeah i got it up using the drill battery, now how do i figure out if the switch or both switch's are bad? i don't wanna buy something i don't need
Modified by clean at 12:26 PM 7/27/2008
Modified by clean at 12:26 PM 7/27/2008
#7
Honda-Tech Member
Join Date: Sep 2003
Location: St.Louis, MO. USA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Take the switch out and clean the metal contacks on the switch. I know it sounds funny, but I can only roll my passenger side up from the passengerside. I have to clean the metal parts like once a month. When u take the switch out and take it apart there is a small c clip in a little rod that goes through the switch and after you take the rod out the button pops off and there are the metal connectors they are in the shape of a V they are a bitch. I am looking to get a new switch soon from honda it is killin me.
Thread
Thread Starter
Forum
Replies
Last Post
Potenza
Honda Civic / Del Sol (1992 - 2000)
9
05-01-2013 05:05 PM
hondapwr
Honda Civic / Del Sol (1992 - 2000)
2
07-17-2009 05:30 PM
MtbikingKing
Honda Accord (1990 - 2002)
5
05-05-2006 09:27 PM