one-cam

got my motor built and when i was putting in my oil pressure sensor it broke. i want to get my motor in asap but ran into this problem. any help on getting this out will be helpful

a little preview

blk92_d16

Drill it out, tap the hole.

Vitara setup I see! What's the plan?

one-cam

Vitaras 75.05mm
Eagle Rods
ARP headstuds
Hondata s200
.. in a 90 dx converted from dpfi to mpfi and now being converted to obd1. y7 block, skunk2 z6 head.. mini-me
Gonna open a thread here shortly on the build

nihad

iTrader: (2)

If you drill and tap you are gonna have to take the girdle off to get the shavings out. It will fall down in to it.

cpl rampage

yeah, drilling and tapping would work, or u could always weld it ****, and then get a sandwich adapter, and run it off of there.

Frozen E

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cpl rampage &raquo;</TD></TR><TR><TD CLASS="quote">or u could always weld it shut, and then get a sandwich adapter, and run it off of there.</TD></TR></TABLE>

Least amount of asspain if you can do your own welding.

one-cam

if you just drill a big enough hole to put on of these (easy outs) it should come right out

slvrcvc93

This happen to me once before but I had more to work with i got a flat head about the size of the hole tapped it in lightly then turned it like i was unscrewing the nut and it cam out with it. Left no metal shaving's in the motor