Oil leak from distributor
#29
Re: Oil leak from distributor
When you replaced that O ring on distributor, did you clean the hole where distributor goes in really well? If you didn't, then you will have leak like that because oil is like that. It comes out with other leftover oils pass through any seals. Take the distributor out, clean the distributor head really well, clean the engine side too. Till dry. Put it back in. Don't let any oil comes out.see if that fixes.
#31
Re: Oil leak from distributor
i checked my o-ring today its still good and new no cracks or tears whats so ever, but the leak has gotten really bad, i had to park the car because im losing so much oil, what should i do? and where is the shaft seal located?
#34
Re: Oil leak from distributor
A. did you install the o-ring properly meaning installed around the distribuator properly cuz you cant just throw it on it goes on a certain way and if its on backwards it will leak.
#35
#36
oil leak
still have the same oil leak on my transmission have replaced, both seals in my dizzy thats nice and dry now and ive replaced the vtec selonoid seal and i also put honda bond seems kinda wet dont know what to do about it. put some honda bond on my valve cover, no leaks form there. also after i run it for a awhile when i come home and pop the hood i can hear a dripping noise sounds like it might be in my header but i cant tell anyways if you guys have any ideas please let me know ive been fighting this oil leak for months and ive got oil spots everywhere.
#40
Honda-Tech Member
Join Date: Apr 2011
Location: Near Pacific Coast Highway
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Re: oil leak
i dont see any fresh oil just residue. but i would say intake manifold if you already (properly) reseal solenoid and dizzy.
look at your intake manifold is it oily?
look at your intake manifold is it oily?
#41
Re: oil leak
no thats fresh oil i promise, i degreased it and had it bone dry drove around alittle bit today hitting vtec a few times and some oil came out, just checked the intake manifold and it is oily, what does it need?
#46
Honda-Tech Member
Join Date: Apr 2011
Location: Near Pacific Coast Highway
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
#48
Honda-Tech Member
Join Date: Apr 2011
Location: Near Pacific Coast Highway
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts