OBD2A SOHC -> OBD2A B SERIES CKP
#1
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
OBD2A SOHC -> OBD2A B SERIES CKP
I have a single cam harness with the three wire ckp, I am swapping a obd2 b-series into it (2 wire ckp) I need some information on how to rewire the sensor/harness. Haven't been able to find out any information on it so far. Any help will be appreciated. Thanks.
#2
Honda-Tech Member
Re: OBD2A SOHC -> OBD2A B SERIES CKP (VtecKiDD)
If your running an obd1 ecu you dont need to worry about hat sensor. If your running obd2 what i would do is just swap the D for the B.
#4
Honda-Tech Member
Re: OBD2A SOHC -> OBD2A B SERIES CKP (VtecKiDD)
Blu is the signal, Wht is the ground. The Blk wire is just the shielding being grounded, which the B16A2 doesn't use.
And it's the CKF sensor you're messing with. The CKP is up inside the distributor (Civic's and Teg's, at least).
And it's the CKF sensor you're messing with. The CKP is up inside the distributor (Civic's and Teg's, at least).
#5
Re: OBD2A SOHC -> OBD2A B SERIES CKP (VtecKiDD)
hope this helps
http://technet.ff-squad.com/ckftrick.htm
http://technet.ff-squad.com/ckftrick.htm
Thread
Thread Starter
Forum
Replies
Last Post
billard
Honda Civic / Del Sol (1992 - 2000)
14
03-21-2011 06:55 PM
jdmshawn95
Honda Civic / Del Sol (1992 - 2000)
3
01-16-2011 09:18 AM
lostsol530
Honda Civic / Del Sol (1992 - 2000)
1
01-06-2005 07:25 PM