No SOL go to waste.
#26
Man U FTW
Do you have any horizontal views of the oil drain? To me it looks like it may be a little less than ideal since it loops around as much as it does. The best bet is short, simple and always downward.
#28
Honda-Tech Member
Join Date: Jan 2008
Location: Rain, snow& sometimes shine, Wa
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Schister66)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 »</TD></TR><TR><TD CLASS="quote">Do you have any horizontal views of the oil drain? To me it looks like it may be a little less than ideal since it loops around as much as it does. The best bet is short, simple and always downward. </TD></TR></TABLE>
x2
x2
#29
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: YORK, PA, US
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Schister66)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 »</TD></TR><TR><TD CLASS="quote">Do you have any horizontal views of the oil drain? To me it looks like it may be a little less than ideal since it loops around as much as it does. The best bet is short, simple and always downward. </TD></TR></TABLE>
I wanted to go with the shortest oil drain as possible but the AN fitting from B&R Fitting made it impossible to do, so i looped it away from the down pipe. It's working very well so far. Here all the pics i have of it....
It might be hard to see, but it's all on a down slope angle...no problem at all!
I wanted to go with the shortest oil drain as possible but the AN fitting from B&R Fitting made it impossible to do, so i looped it away from the down pipe. It's working very well so far. Here all the pics i have of it....
It might be hard to see, but it's all on a down slope angle...no problem at all!
#30
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: YORK, PA, US
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Minh826)
Another update:
I had some time on saturday to work on my car so i bought some 3" piping and pieced together my staight 3" exhaust. Here some pic of the work in progress...
I had some time on saturday to work on my car so i bought some 3" piping and pieced together my staight 3" exhaust. Here some pic of the work in progress...
#34
Honda-Tech Member
Join Date: Aug 2007
Location: HELL, CA, US
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Dope build...its tight.....lol...thats what i call straight piped..lol......
one thing, u drove the car N/A on forged low compression vitara pistons while u got ur turbo setup if i read correctly....i had read somehwere here you couldnt do that...cuz i wanted to do that....
since you've done it....i suppose it would be fine for me to run forged low compression pistons/rods on a b20 vtec? this is because i cant wait to put my engine in...but i still need alot of the turbo accesories.
one thing, u drove the car N/A on forged low compression vitara pistons while u got ur turbo setup if i read correctly....i had read somehwere here you couldnt do that...cuz i wanted to do that....
since you've done it....i suppose it would be fine for me to run forged low compression pistons/rods on a b20 vtec? this is because i cant wait to put my engine in...but i still need alot of the turbo accesories.
#37
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: YORK, PA, US
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MrXclusivE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MrXclusivE »</TD></TR><TR><TD CLASS="quote">holy **** thats gonna be loud as [freak]!
nice build!</TD></TR></TABLE>
It's loud, but sounds good when the turbo spool.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SinsEvil666 »</TD></TR><TR><TD CLASS="quote">Dope build...its tight.....lol...thats what i call straight piped..lol......
one thing, u drove the car N/A on forged low compression vitara pistons while u got ur turbo setup if i read correctly....i had read somehwere here you couldnt do that...cuz i wanted to do that....
since you've done it....i suppose it would be fine for me to run forged low compression pistons/rods on a b20 vtec? this is because i cant wait to put my engine in...but i still need alot of the turbo accesories.</TD></TR></TABLE>
I ran the car to break it in n/a form at it ran fine. It just lacked power but had no other problem. I ran it for like 800 mile, so everything good so far..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bob Dole! »</TD></TR><TR><TD CLASS="quote">Definitely in for the build!</TD></TR></TABLE>
nice build!</TD></TR></TABLE>
It's loud, but sounds good when the turbo spool.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SinsEvil666 »</TD></TR><TR><TD CLASS="quote">Dope build...its tight.....lol...thats what i call straight piped..lol......
one thing, u drove the car N/A on forged low compression vitara pistons while u got ur turbo setup if i read correctly....i had read somehwere here you couldnt do that...cuz i wanted to do that....
since you've done it....i suppose it would be fine for me to run forged low compression pistons/rods on a b20 vtec? this is because i cant wait to put my engine in...but i still need alot of the turbo accesories.</TD></TR></TABLE>
I ran the car to break it in n/a form at it ran fine. It just lacked power but had no other problem. I ran it for like 800 mile, so everything good so far..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bob Dole! »</TD></TR><TR><TD CLASS="quote">Definitely in for the build!</TD></TR></TABLE>
#39
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: YORK, PA, US
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SiYouLater)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiYouLater »</TD></TR><TR><TD CLASS="quote">I'm gonna need a sound clip of that! </TD></TR></TABLE>
I will try to get that on soon....
I will try to get that on soon....
#40
Honda-Tech Member
Join Date: Oct 2004
Location: oregon, usa
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Minh826)
what did you use to tune the car? how does it run with the 3 " piping i have almost the same setup you have but still working on it i was told to go 2.5 on the piping but i think its too small i asked this question earlier about your timing ? have you changed it?
#41
Honda-Tech Member
Re: No SOL go to waste. (SkankyEJ7)
Good build
Stupid decision to not white out the license plates now everyone know's everything about the car. Im sure were gonna see a post soon stolen del sol. Philly is bad with stolen hondas you should know that.Plain out dumb
Modified by Frost7177 at 2:25 AM 4/19/2008
Stupid decision to not white out the license plates now everyone know's everything about the car. Im sure were gonna see a post soon stolen del sol. Philly is bad with stolen hondas you should know that.Plain out dumb
Modified by Frost7177 at 2:25 AM 4/19/2008
#42
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: YORK, PA, US
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: (b17 turbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b17 turbo »</TD></TR><TR><TD CLASS="quote">what did you use to tune the car? how does it run with the 3 " piping i have almost the same setup you have but still working on it i was told to go 2.5 on the piping but i think its too small i asked this question earlier about your timing ? have you changed it?</TD></TR></TABLE>
The car will be tuned with ectune, but as of right now it's stock until my ecu is done. I will keep you posted, it should be tuned this coming weekend...
The car will be tuned with ectune, but as of right now it's stock until my ecu is done. I will keep you posted, it should be tuned this coming weekend...
#43
Re: No SOL go to waste. (Minh826)
Awesome looking build here, and the car is starting to look just as good! I'm doing the same exact thing with my 92 hatch, i just dont have the apr studs yet ,lol. I have around 1200 miles on mine and havnt heard the "vitara" noises i've heard about yet. 1k of those were break on miles though, lol.
#46
Honda-Tech Member
Join Date: Apr 2007
Location: Jacksonville, FL
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boejangle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Frost7177 »</TD></TR><TR><TD CLASS="quote">Good build
Stupid decision to not white out the license plates now everyone know's everything about the car. Im sure were gonna see a post soon stolen del sol. Philly is bad with stolen hondas you should know that.Plain out dumb
Modified by Frost7177 at 2:25 AM 4/19/2008</TD></TR></TABLE>
you my friend are an absolute retard.... nice contribution to the build
lol dumbass
do you drive around with no license plates so someone cant write it down and find out where you live? i just dont understand the difference
Stupid decision to not white out the license plates now everyone know's everything about the car. Im sure were gonna see a post soon stolen del sol. Philly is bad with stolen hondas you should know that.Plain out dumb
Modified by Frost7177 at 2:25 AM 4/19/2008</TD></TR></TABLE>
you my friend are an absolute retard.... nice contribution to the build
lol dumbass
do you drive around with no license plates so someone cant write it down and find out where you live? i just dont understand the difference
#49
Honda-Tech Member
Re: (Ep1dem1c)
Im a retard? Lol who said anything about not driving around without license plates? What a moron. He has pictures of his car on h-t with the license plate numbers on it with the mods done not a smart idea. Everyone knows on this site not to post that obviously you are a retard or you wouldn’t post a ridiculous comment as to riding around w/o license.