My build: H2b into 2000 Ek
#52
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Posts: 2,520
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MJobe)
im starting to assemble everything, will prolly be about 3-4 weeks before its any where close to running, between school and work i just dont have a ton of time to work on it.
#53
Re: My build: H2b into 2000 Ek (Dr. *****)
with the h2b does the mid shaft for the axles bolt on to the h motor or do you have to buy a special one for the swap also the linkage is it the same as b-series linkage
#56
Honda-Tech Member
Join Date: Apr 2006
Location: Warrenville, IL, US
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dr. *****)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dr. ***** »</TD></TR><TR><TD CLASS="quote">Well i suppose its time for some pics that ive been promising.
First look what showed up today from japan, it showed up in two days which i thought was rediculous fast, japan to cali in two days. I won this in a japanese auction for CHEAP!!!!
Here is the car the h2b is going into.
And here is the motor currently in the car..... good ole d15b
</TD></TR></TABLE>
You got me a little worried man... Thats a D16y7......
First look what showed up today from japan, it showed up in two days which i thought was rediculous fast, japan to cali in two days. I won this in a japanese auction for CHEAP!!!!
Here is the car the h2b is going into.
And here is the motor currently in the car..... good ole d15b
</TD></TR></TABLE>
You got me a little worried man... Thats a D16y7......
#58
Re: (bmoua)
check your dampening settings on the coil overs, also check the height on the coils,
did you set the height with them off or on the car? what did you use to messure them?
did you set the height with them off or on the car? what did you use to messure them?
#60
Honda-Tech Member
Re: My build: H2b into 2000 Ek (Dr. *****)
i saw that you shaved your crank pully but how do you plan to take it off if you ever have too? I have a hell of a time takeing mine off even with the tool sometimes
#63
Honda-Tech Member
Join Date: Sep 2005
Location: MidWest
Posts: 2,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: (h2b_eg8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h2b_eg8 »</TD></TR><TR><TD CLASS="quote">x2</TD></TR></TABLE>
X3
X3
#66
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Posts: 2,520
Likes: 0
Received 0 Likes
on
0 Posts
Re: (H.Veras)
the motor is a d15b, trust me, its not a y7 the car didnt come with a motor and thats what i put in it. uhh not much on progress, im in the middle of installing my ls 5th gear into my tranny, and my camp1320 header showed up yesterday. i havent been workin on it as much cause, i did a power window, mirrors and locks conversion on my car. but i hvae sunday off so i plan on finishing up the trans and starting to install the h2b kit ill post some pics.
#67
Honda-Tech Member
Join Date: Jul 2003
Location: columbus, ohio, usa
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dr. *****)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dr. ***** »</TD></TR><TR><TD CLASS="quote">the motor is a d15b, trust me, its not a y7 the car didnt come with a motor and thats what i put in it. uhh not much on progress, im in the middle of installing my ls 5th gear into my tranny, and my camp1320 header showed up yesterday. i havent been workin on it as much cause, i did a power window, mirrors and locks conversion on my car. but i hvae sunday off so i plan on finishing up the trans and starting to install the h2b kit ill post some pics.</TD></TR></TABLE>
You can barely see it in the backround but you can see the vtec solenoid on that motor which y7's don't have.Build looks good.
You can barely see it in the backround but you can see the vtec solenoid on that motor which y7's don't have.Build looks good.
#68
Join Date: Apr 2007
Location: Johnston, Iowa, United States
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Re: My build: H2b into 2000 Ek (Dr. *****)
i dont know about painting? not the best idea. should of just sandblasted the block and did a coating of aluminum treatment. thats gonnna peel more then a banana when you get that stuff warmed up for the first time. cheaper to blast then to waste on paint.
#70
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Posts: 2,520
Likes: 0
Received 0 Likes
on
0 Posts
Re: My build: H2b into 2000 Ek (spotscivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spotscivic »</TD></TR><TR><TD CLASS="quote">i dont know about painting? not the best idea. should of just sandblasted the block and did a coating of aluminum treatment. thats gonnna peel more then a banana when you get that stuff warmed up for the first time. cheaper to blast then to waste on paint.</TD></TR></TABLE>
i dont really even care if it peals, i know it wont cause i tons of people that have used it, but like i said i dont care if it does, even with pealing paint it will look better then it did when i first got the block.
here is a pic of the trans with the new 5th gear installed,
block work is coming tomarrow, my camp 1320 header also showed up last week and man is it shiny lol.
i dont really even care if it peals, i know it wont cause i tons of people that have used it, but like i said i dont care if it does, even with pealing paint it will look better then it did when i first got the block.
here is a pic of the trans with the new 5th gear installed,
block work is coming tomarrow, my camp 1320 header also showed up last week and man is it shiny lol.
#73
Honda-Tech Member
Join Date: Mar 2005
Location: Roanoke, Virginia, United States
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">lol, I'm excited about the build. But I still want to see a pic of the d-series engine stamp. I still think it's a d16y7.</TD></TR></TABLE>
He should know which engine he has....it is his car. I also see a vtec solenoid on the back of the engine. d16y7 is not vtec.
He should know which engine he has....it is his car. I also see a vtec solenoid on the back of the engine. d16y7 is not vtec.
#75
Honda-Tech Member
Re: (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">lol, I'm excited about the build. But I still want to see a pic of the d-series engine stamp. I still think it's a d16y7.</TD></TR></TABLE>
it has a vtak solenoid
it has a vtak solenoid