K24A2 OR K20Z1 FOR EK9
#1
Thread Starter
Join Date: Oct 2007
Location: maricopa, az, united states
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
K24A2 OR K20Z1 FOR EK9
NEED SOME OPINIONS I CURRENTLY HAVE A 2004 K24A2 WITH 1-3 MILES WITH TYPE S TRANNY AND I ALSO HAVE A 2006 K20Z1 WITH 7500 MILES IM NOT SURE WHICH ENGINE WILL BE BETTER FOR MY SWAP IN MY EK9 I CURRENTLY JUST HAVE THE MONEY TO GET THE SWAP DONE BUT PLAN ON ADDING FULL RACE SETUP IN THE FUTURE SO PEOPLE LET ME KNOW WHICH SWAP WILL BE BETTER TO GO WITH
#4
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
Re: K24A2 OR K20Z1 FOR EK9 (stunningwheelsntires)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stunningwheelsntires »</TD></TR><TR><TD CLASS="quote">ok y would i waste my time and other peoples time im not trying impress people i dont even know </TD></TR></TABLE>
You wouldn't be the first by a longshot.
I'm pretty sure you can do a K24 block w/ a K20 head on it, I don't know much about it, but I'm pretty damn sure it's possible, information like that would be available in the hybrid forum and ESPECIALLY ALL OVER http://www.k20a.org.
You wouldn't be the first by a longshot.
I'm pretty sure you can do a K24 block w/ a K20 head on it, I don't know much about it, but I'm pretty damn sure it's possible, information like that would be available in the hybrid forum and ESPECIALLY ALL OVER http://www.k20a.org.
Trending Topics
#8
Former Moderator
Re: K24A2 OR K20Z1 FOR EK9 (stunningwheelsntires)
Correct me if i'm wrong everyone, but aren't there differences in mounts/locations for mount brackets on the K20Z block?
I remember whn I was seriously considering a K swap that Brian from HASport told me back then that they hadn't developed the K20Z mount kits for the EG. Keep in mind this was a few years ago, so they may have the right parts now.
I remember whn I was seriously considering a K swap that Brian from HASport told me back then that they hadn't developed the K20Z mount kits for the EG. Keep in mind this was a few years ago, so they may have the right parts now.
#9
H-T White Ops
Re: K24A2 OR K20Z1 FOR EK9 (stunningwheelsntires)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stunningwheelsntires »</TD></TR><TR><TD CLASS="quote">I need some opinions.
I currently have a 2004 K24A2 with 1-3 miles and a Type-S tranny. I also have a 2006 K20Z1 with 7500 miles. I'm not sure which engine will be better for my swap in my EK9.
I currently just have the money to get the swap done, but plan on adding a full race setup.
So, tell me which swap will be better to go with.</TD></TR></TABLE>
I say keep it stock. If you have a Civic Type-R in the US, you have something uncommon. Keep it stock.
If you want to swap one of these into a car, look for a USDM Civic CX or DX hatch instead.
I currently have a 2004 K24A2 with 1-3 miles and a Type-S tranny. I also have a 2006 K20Z1 with 7500 miles. I'm not sure which engine will be better for my swap in my EK9.
I currently just have the money to get the swap done, but plan on adding a full race setup.
So, tell me which swap will be better to go with.</TD></TR></TABLE>
I say keep it stock. If you have a Civic Type-R in the US, you have something uncommon. Keep it stock.
If you want to swap one of these into a car, look for a USDM Civic CX or DX hatch instead.
#10
Former Moderator
Re: K24A2 OR K20Z1 FOR EK9 (NOFX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NOFX »</TD></TR><TR><TD CLASS="quote">
I say keep it stock. If you have a Civic Type-R in the US, you have something uncommon. Keep it stock.
If you want to swap one of these into a car, look for a USDM Civic CX or DX hatch instead.</TD></TR></TABLE>
You know buddy probably doesn't have a REAL EK9 civic Type R, right?
You're being cleverly sarcastic, aren't you?
I say keep it stock. If you have a Civic Type-R in the US, you have something uncommon. Keep it stock.
If you want to swap one of these into a car, look for a USDM Civic CX or DX hatch instead.</TD></TR></TABLE>
You know buddy probably doesn't have a REAL EK9 civic Type R, right?
You're being cleverly sarcastic, aren't you?
#11
H-T White Ops
Re: K24A2 OR K20Z1 FOR EK9 (B18C5-EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C5-EH2 »</TD></TR><TR><TD CLASS="quote">You know buddy probably doesn't have a REAL EK9 civic Type R, right?
You're being cleverly sarcastic, aren't you?</TD></TR></TABLE>
Cleverly sarcastic? Nah...
*shhhh*
Chassis codes: If you're going to use them, know what the hell they mean.
You're being cleverly sarcastic, aren't you?</TD></TR></TABLE>
Cleverly sarcastic? Nah...
*shhhh*
Chassis codes: If you're going to use them, know what the hell they mean.
#12
Re: K24A2 OR K20Z1 FOR EK9 (NOFX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NOFX »</TD></TR><TR><TD CLASS="quote">Chassis codes: If you're going to use them, know what the hell they mean.
</TD></TR></TABLE>
You should mass-IM that to all of Honda-Tech.
</TD></TR></TABLE>
You should mass-IM that to all of Honda-Tech.
#13
Thread Starter
Join Date: Oct 2007
Location: maricopa, az, united states
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: K24A2 OR K20Z1 FOR EK9 (B18C5-EH2)
TO BE HONEST MY FRIEND JUST GOT ME INTO THE WHOLE HONDA THEME SO IM STILL GREEN. MY FRIEND TELLS ME TO GO WITH MY K24A2 FOR THE TORQUE BUT I WANNA HEAR OTHER PEOPLES OPINIONS SO LET ME KNOW WHICH ONE WOULD YOU HAVE OF PREFERENCE AND Y
#14
Former Moderator
Re: K24A2 OR K20Z1 FOR EK9 (stunningwheelsntires)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stunningwheelsntires »</TD></TR><TR><TD CLASS="quote">TO BE HONEST MY FRIEND JUST GOT ME INTO THE WHOLE HONDA THEME SO IM STILL GREEN. MY FRIEND TELLS ME TO GO WITH MY K24A2 FOR THE TORQUE BUT I WANNA HEAR OTHER PEOPLES OPINIONS SO LET ME KNOW WHICH ONE WOULD YOU HAVE OF PREFERENCE AND Y </TD></TR></TABLE>
1. Please turn caps lock off - that's the internet equivalent of yelling
2. K24A engines are great for passenger cars that need torque down low.
I love my K24A...in my 2005 Element. It's great for lugging around town, but I'd NEVER build a hot rod based upon that engine. The K20Z will make more power and it likes to be revved, and was engineeered to sustain higher revs for longers amounts of time than the K24A.
1. Please turn caps lock off - that's the internet equivalent of yelling
2. K24A engines are great for passenger cars that need torque down low.
I love my K24A...in my 2005 Element. It's great for lugging around town, but I'd NEVER build a hot rod based upon that engine. The K20Z will make more power and it likes to be revved, and was engineeered to sustain higher revs for longers amounts of time than the K24A.
#15
Re: K24A2 OR K20Z1 FOR EK9 (B18C5-EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C5-EH2 »</TD></TR><TR><TD CLASS="quote">
1. Please turn caps lock off - that's the internet equivalent of yelling
2. K24A engines are great for passenger cars that need torque down low.
I love my K24A...in my 2005 Element. It's great for lugging around town, but I'd NEVER build a hot rod based upon that engine. The K20Z will make more power and it likes to be revved, and was engineeered to sustain higher revs for longers amounts of time than the K24A.
</TD></TR></TABLE>
Definitely use the k24a2!! torque owns u!
We just recently finished a k24a2 turbo build and it eats up k20 turbo swaps by a long shot - any where you shift in the power band you have power - ENJOY!
1. Please turn caps lock off - that's the internet equivalent of yelling
2. K24A engines are great for passenger cars that need torque down low.
I love my K24A...in my 2005 Element. It's great for lugging around town, but I'd NEVER build a hot rod based upon that engine. The K20Z will make more power and it likes to be revved, and was engineeered to sustain higher revs for longers amounts of time than the K24A.
</TD></TR></TABLE>
Definitely use the k24a2!! torque owns u!
We just recently finished a k24a2 turbo build and it eats up k20 turbo swaps by a long shot - any where you shift in the power band you have power - ENJOY!
#16
Former Moderator
Re: K24A2 OR K20Z1 FOR EK9 (HAMOTORSPORTSUSA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HAMOTORSPORTSUSA »</TD></TR><TR><TD CLASS="quote">
Definitely use the k24a2!! torque owns u!
We just recently finished a k24a2 turbo build and it eats up k20 turbo swaps by a long shot - any where you shift in the power band you have power - ENJOY!</TD></TR></TABLE>
Okay let me clarify:
Stock vs. stock the K24A is a **** engine for high revving, abusive driving when compared to the K20Z.
I mean sure a K24A block, K20A Type R head, rods, pistons, boost etc. etc. sure the K24a would be gravy...
I hate this topic
I think the OP should post pics of his car, both engines, and the transmission before anyone else replies at all.
Show some proof, and maybe you'll get more help?
Definitely use the k24a2!! torque owns u!
We just recently finished a k24a2 turbo build and it eats up k20 turbo swaps by a long shot - any where you shift in the power band you have power - ENJOY!</TD></TR></TABLE>
Okay let me clarify:
Stock vs. stock the K24A is a **** engine for high revving, abusive driving when compared to the K20Z.
I mean sure a K24A block, K20A Type R head, rods, pistons, boost etc. etc. sure the K24a would be gravy...
I hate this topic
I think the OP should post pics of his car, both engines, and the transmission before anyone else replies at all.
Show some proof, and maybe you'll get more help?
#17
Re: K24A2 OR K20Z1 FOR EK9 (B18C5-EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C5-EH2 »</TD></TR><TR><TD CLASS="quote">
Okay let me clarify:
Stock vs. stock the K24A is a **** engine for high revving, abusive driving when compared to the K20Z.
I mean sure a K24A block, K20A Type R head, rods, pistons, boost etc. etc. sure the K24a would be gravy...
I hate this topic
I think the OP should post pics of his car, both engines, and the transmission before anyone else replies at all.
Show some proof, and maybe you'll get more help?</TD></TR></TABLE>
K24a2 is the tsx longblock
It is NEARLY identical to a k24a1/3/4/8 with a k20a head but with different rods and pistons
k24a1/3/4/8 ~ 160-170hp
k24a2 ~ 200hp
Modified by HAMOTORSPORTSUSA at 3:00 PM 11/13/2007
Okay let me clarify:
Stock vs. stock the K24A is a **** engine for high revving, abusive driving when compared to the K20Z.
I mean sure a K24A block, K20A Type R head, rods, pistons, boost etc. etc. sure the K24a would be gravy...
I hate this topic
I think the OP should post pics of his car, both engines, and the transmission before anyone else replies at all.
Show some proof, and maybe you'll get more help?</TD></TR></TABLE>
K24a2 is the tsx longblock
It is NEARLY identical to a k24a1/3/4/8 with a k20a head but with different rods and pistons
k24a1/3/4/8 ~ 160-170hp
k24a2 ~ 200hp
Modified by HAMOTORSPORTSUSA at 3:00 PM 11/13/2007
#18
Former Moderator
Re: K24A2 OR K20Z1 FOR EK9 (HAMOTORSPORTSUSA)
I don't care if it's a TSX engine - it's a ******* Accord passenger car engine not intended to be high strung and driven like a K20Z is.
Anyways you and I can can continue arguing in this fufkcing retarded topic if we wanted to, but the bottom line is I think the OP is full of ****, and we've all been baited into an e-war for no real reason at all.
Anyways you and I can can continue arguing in this fufkcing retarded topic if we wanted to, but the bottom line is I think the OP is full of ****, and we've all been baited into an e-war for no real reason at all.
#19
Re: K24A2 OR K20Z1 FOR EK9 (B18C5-EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C5-EH2 »</TD></TR><TR><TD CLASS="quote">I don't care if it's a TSX engine - it's a ******* Accord passenger car engine not intended to be high strung and driven like a K20Z is.
Anyways you and I can can continue arguing in this fufkcing retarded topic if we wanted to, but the bottom line is I think the OP is full of ****, and we've all been baited into an e-war for no real reason at all.
</TD></TR></TABLE>
TSX= ACCORD?
Have you driven an eg/ek with a K24a2?
Have you driven an eg/ek with a K20?
I have done about ten K swaps, and trust me the k24a2 murders all others stock
HOWEVER, I can agree with you that we need pics of both to prove you are such a baller that you say
Anyways you and I can can continue arguing in this fufkcing retarded topic if we wanted to, but the bottom line is I think the OP is full of ****, and we've all been baited into an e-war for no real reason at all.
</TD></TR></TABLE>
TSX= ACCORD?
Have you driven an eg/ek with a K24a2?
Have you driven an eg/ek with a K20?
I have done about ten K swaps, and trust me the k24a2 murders all others stock
HOWEVER, I can agree with you that we need pics of both to prove you are such a baller that you say
#20
Thread Starter
Join Date: Oct 2007
Location: maricopa, az, united states
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: K24A2 OR K20Z1 FOR EK9 (HAMOTORSPORTSUSA)
ok y would i waste my time and bs about something i dont have when i own a rim shop and have all kinds of cars and trucks on 26" and wheels that cost twice as much as any k motor and have my own home at age 21 you can check out for urself on my myspace and i will also add pictures of my motors that i purchased at first to flip cuz the price was something i could not refuse so i jumped on them and if still dont balieve me ill add more pictures of me in front off my home and driving my cars lol cant balieve this all for little toys http://www.myspace.com/stunningwheelsntires
#21
Re: K24A2 OR K20Z1 FOR EK9 (stunningwheelsntires)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stunningwheelsntires »</TD></TR><TR><TD CLASS="quote">ok y would i waste my time and bs about something i dont have when i own a rim shop and have all kinds of cars and trucks on 26" and wheels that cost twice as much as any k motor and have my own home at age 21 you can check out for urself on my myspace and i will also add pictures of my motors that i purchased at first to flip cuz the price was something i could not refuse so i jumped on them and if still dont balieve me ill add more pictures of me in front off my home and driving my cars lol cant balieve this all for little toys http://www.myspace.com/stunningwheelsntires</TD></TR></TABLE>
Don't worry, we aren't hating. Some people jsut like a little proof.
Don't worry, we aren't hating. Some people jsut like a little proof.
#22
Junior Member
Join Date: Mar 2005
Location: the IE, CA, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
this is to ek forever guy.. you said
""full race"
As in it wont be street legal and you'll carry it around on a trailer?
Are you prepared to do that?
I smell fish."
so you think that all the hondas roming the street are street legal??? you must be rally ignorant i dont know how it works in GA but if your street legal you slow.....
""full race"
As in it wont be street legal and you'll carry it around on a trailer?
Are you prepared to do that?
I smell fish."
so you think that all the hondas roming the street are street legal??? you must be rally ignorant i dont know how it works in GA but if your street legal you slow.....
#23
* B A N N E D *
Join Date: Oct 2007
Location: Running Round At Night In Los Angeles Like A Crazy, Veva Mexco, Veva Mexco
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Re: K24A2 OR K20Z1 FOR EK9 (Jakester9500)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jakester9500 »</TD></TR><TR><TD CLASS="quote">I don't believe you.</TD></TR></TABLE> hahahah i know
#24
H-T White Ops
Re: K24A2 OR K20Z1 FOR EK9 (HAMOTORSPORTSUSA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HAMOTORSPORTSUSA »</TD></TR><TR><TD CLASS="quote">Don't worry, we aren't hating. Some people jsut like a little proof.</TD></TR></TABLE>
Meh, you don't need money to have toys anyway. There are lots of people on this site who have really cool cars and toys and don't make a lot of money.
Meh, you don't need money to have toys anyway. There are lots of people on this site who have really cool cars and toys and don't make a lot of money.
#25
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: K24A2 OR K20Z1 FOR EK9 (NOFX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NOFX »</TD></TR><TR><TD CLASS="quote">
Meh, you don't need money to have toys anyway. There are lots of people on this site who have really cool cars and toys and don't make a lot of money.</TD></TR></TABLE>
Credit cards and student loans, baby
Meh, you don't need money to have toys anyway. There are lots of people on this site who have really cool cars and toys and don't make a lot of money.</TD></TR></TABLE>
Credit cards and student loans, baby