JDM ctr crank pulley...what belt to used???
03-10-2010, 04:47 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: B18c1, PA, usa
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
JDM ctr crank pulley...what belt to used???
like title says...i put the pulley on my gsr and the stock gsr alt. belt is too long....so i was wonderin what belt i should used? sohc's?
03-10-2010, 06:56 PM
#2
Honda-Tech Member
Join Date: Oct 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM ctr crank pulley...what belt to used???
If you can't find the P# by searching... you can do the string trick.
If your belt already has the correct width/# of ribs. Use a piece of string around the pulleys and cut it to where the ends just meet, then measure it to get the correct length. Take the belt back to the parts store, and give them the length you need & they can grab one that should work for you.
Andrew
If your belt already has the correct width/# of ribs. Use a piece of string around the pulleys and cut it to where the ends just meet, then measure it to get the correct length. Take the belt back to the parts store, and give them the length you need & they can grab one that should work for you.
Andrew
03-12-2010, 04:09 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: B18c1, PA, usa
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
03-12-2010, 04:41 PM
#5
Re: JDM ctr crank pulley...what belt to used???
ya know, if you would do some of your own work, search around, maybe call someone that sells ctr pulleys, ask what belt they use you could get results alot faster.
03-12-2010, 04:53 PM
#6
Re: JDM ctr crank pulley...what belt to used???
If you can't find the P# by searching... you can do the string trick.
If your belt already has the correct width/# of ribs. Use a piece of string around the pulleys and cut it to where the ends just meet, then measure it to get the correct length. Take the belt back to the parts store, and give them the length you need & they can grab one that should work for you.
Andrew
If your belt already has the correct width/# of ribs. Use a piece of string around the pulleys and cut it to where the ends just meet, then measure it to get the correct length. Take the belt back to the parts store, and give them the length you need & they can grab one that should work for you.
Andrew
Also IIRC, the ITR uses the same alternator belt as the CTR.
.
04-06-2010, 10:37 AM
#7
Moderator
Re: JDM ctr crank pulley...what belt to used???
Thread
Thread Starter
Forum
Replies
Last Post
gsrsuperman
All Motor / Naturally Aspirated
5
12-02-2007 07:57 PM
