Help with ZC Swap in 94 Civic EX!!!!
#1
Banned
Thread Starter
Join Date: Feb 2004
Location: Canada
Posts: 7,253
Likes: 0
Received 0 Likes
on
0 Posts
Help with ZC Swap in 94 Civic EX!!!!
Heres the deal. We're working on a 94 civic EX, there is a DOHC ZC bolted in. Here is the problem... the OBD1 SOHC Distributor that came in the car will not bolt up, and the OBD0 ZC Distributor won't wire up to the EX harness. What kind of distributor will we need to make this work? The car still has the EX wiring harness and it does not currently have an ECU. The things I need to know are, which distributor do we need and which ECU do we need. Any help is appreciated, we're trying to get this car on the road. Thanks HT!
- LSV
- LSV
#3
Banned
Thread Starter
Join Date: Feb 2004
Location: Canada
Posts: 7,253
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with ZC Swap in 94 Civic EX!!!! (LSVTEC 91 Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSVTEC 91 Civic »</TD></TR><TR><TD CLASS="quote">Bump! </TD></TR></TABLE>
Anybody?
Anybody?
#4
Banned
Thread Starter
Join Date: Feb 2004
Location: Canada
Posts: 7,253
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with ZC Swap in 94 Civic EX!!!! (LSVTEC 91 Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSVTEC 91 Civic »</TD></TR><TR><TD CLASS="quote">Anybody? </TD></TR></TABLE>
#5
Honda-Tech Member
Re: Help with ZC Swap in 94 Civic EX!!!! (LSVTEC 91 Civic)
I'm not sure on the dizzy, but for the ECU I'd say get an Uberdata chipped P06 w/ an LS program & tune it from there.
#7
Honda-Tech Member
Join Date: Sep 2002
Location: bell gardens, ca, usa
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
i don't understand... ¿why won't it bolt up... we did this swap and we had to use a bolt with a washer to hold it from the bottom, and a C-clamp on the top... it was a obd-0... and we used the stock obd-0 distributor... then we had to get the top bracket from an 92 LS block from the junkyard, and it made it bolt up to at least the top bolt... that was good enough...
i don't know how you are going to do it to convert obd0 to obd1... good luck....
i don't know how you are going to do it to convert obd0 to obd1... good luck....
Thread
Thread Starter
Forum
Replies
Last Post