tony_2018

Man...........by the time I finish my 5spd swap this engine still sittin in the same spot (^_^)*

ferio-ichi3

Lol soon, itll be at my house! Update within a week!

ferio-ichi3

Already has a lip lol

ferio-ichi3

Update:

Got my oem b16 flywheel, and flywheel bolts. Flywheel has to get resurfaced, but im glad i have one. Can you lighten up the stock flywheel?lol

tony_2018

No Turkey, No Care!

ferio-ichi3

Poppycock!

Bently_Coop

I think you can remove a few pounds from the back side of it. If you want a factory lighter flywheel the ITR's are 14lbs compared to the 18lbs you have. Can get them hmotorsonline, still need resurfaced though.

ferio-ichi3

I gotta take it to the machine shop and see what they say. If it dont cost alot, ill have them do it. Resurfacing is a must though. And bearing.

ferio-ichi3

Got the flywheel. Looks good! Now im waiying for the bearing, and it can go on.

tony_2018

5spd done, working on the cruise control issue. Not sure why its not working, its night time. I'll take care of it tomorrow.

New flywheel looks good!

ferio-ichi3

The pink wire control cruise control i believe. I remember when i did mine. Fun times

tony_2018

Its wired the way a manual should be but its not engaging so I'm not sure whats going on. I"ll check tomorrow. I might go for a drive tonight, I miss driving her around.

ferio-ichi3

Check your fuse for cruise control. So you got the cruise control interlock switch? Make sure you have the rubber stopper piece on the pedal. You can use a nut and bolt.that was my issue.

billyem1junki

Nice build man

ferio-ichi3

Thank you, good sir. Its been a process lol.

ferio-ichi3

Got the clutch pilot bearing! Flywheel will go on in the next day or 2.

ferio-ichi3

So my bro sent over some goodies to mt cuz so he can ship them out tomorrow.
Ill be getting:
Chipped ecu
Jdm type r cup holder
Recaro armrest cover
Ctr handbrake

Looking forward to it all!

ferio-ichi3

So i placed the order for the remaining gaskets, and also a obd2-obd1 adapter harness. Still need spark plugs, and the ecu from my bro. I hope i can get everything by mid january. Build is pretty much done!

ferio-ichi3

Merriyu curitsumasu!

ferio-ichi3

Update:
Not a big one, but one i have been thinking about lately. Used the si water hose and snipped a bit off so it fits the gsr waterpipe. Imo looks damn good. No binds in the line, so while it may not be the best thing, its the thing that works... Hoping them parts come soon. Hoping i can trade some k stuff with a dude in FL so i can get his toda spec b cams!!!! I hope i get them! Flywheel going to be tightened up as soon as i get the last bolt out of the middle of the spool the motor is sitting on lol. Hoping to make some deals so i can get cash for a tune.

ferio-ichi3

Flywheel and clutch installed. I had to sand the pressure plate down. Should of have a before and after pics, but i got the friction disk lined up as best as i can. Heres a pic.

Expect an update soon.

ferio-ichi3

Some parts should be here tomorrow. Im hoping to see couple packages lol. I have a job interview on monday. Nothing crazy, but 11/hr is ok with me just enough to get a tune. Happy new years everyone. New years resolution is to want to hold a job for 6 months/have enough cash for a 2nd car/or buy a rental property. Whichever comes first.

ferio-ichi3

Recieved my 45 degree fitting for the oil sending unit. Damn new years, i would have gotten my parts tomorrow, but instead i have to wait til friday smh.

ferio-ichi3

Last bit of parts came. Only things missing are the dizzy bolts, 1 valve cover washer, and break in oil lol. Next week or so, i hope to have a start up!

ferio-ichi3

Got my obd2-obd1 ecu adapter today. Cams are locked in. Probably shouldnt have done that since i still have to get the cam seals off lol. Anyway, i might have a job soon so ill be able to afford a tune.